Handleiding
Je bekijkt pagina 26 van 40
TBR
|
TDR SERIES www.truemfg.com
TEC_TM_043 | REV. F | EN03/2/2023 Page 26 of 40 P#803294
Maintenance, Care & Cleaning
Draft Tower Cleaning
Regardless of design, draught dispensers must be cleaned
regularly. Flushing the draught dispenser with only water is not
enough to maintain cleanliness. True recommends cleaning the
draught dispenser whenever changing to a fresh keg.
Clean dispensers ensure your draught beer will be at its best when
served. Although the beer in the barrel is in excellent condition,
the beer can become less satisfying if drawn through a beer line
and faucet that are not kept clean.
NOTE: Use cleaners approved by your beer supplier and follow
their instructions. If you are using the cleaning kit purchased
from TRUE, follow the instructions below:
Prepare Solution
Add 1/2 oz. (14.2 g) of cleaning solution to each quart of warm
water. Fill the pump bottle with the mixed cleaning solution.
Procedure
1. Shut-off the CO₂ at the regulator.
2. Remove the tapping device (keg coupler) from the keg.
3. Unscrew the handle the from faucet.
4. Remove the beer faucet with the spanner wrench; turn the
faucet clockwise to remove. See fig. 1.
5. Put the tap and faucet parts in a bucket.
6. Thread the pump bottle hose to the beer column tap outlet
and allow the beer line to drain in the bucket. See fig. 2.
NOTE: Be sure the rubber gasket is in place to prevent leaks.
7. Pump the solution from the bottle through the beer line(s) and
into the bucket. Wait 10 minutes while the cleaning solution
works through the lines.
8. With the supplied brush, clean the beer faucet parts. See fig. 3.
9. Rinse all parts thoroughly.
10. Rinse the bucket, pump bottle and hose thoroughly with clean
cool water.
11. Fill the pump bottle with clean cool water and pump water
through lines until it runs clear. Repeat as necessary.
12. After the water runs clear, assemble and install the faucet. Then
re-tap the keg.
Beer Tap Cleaning Kit – Required Tools
BLC System Cleaner
Brush
Pump Bottle & Tube
Spanner Wrench
Rubber Gasket
Bucket & Fresh Water
Rubber
Gasket
Fig. 1. Carefully remove the faucet. Fig. 2. Drain the beer from the line. Fig. 3. Thoroughly clean the faucet
components.
Bekijk gratis de handleiding van True TBR84-RISZ1-L-S-GGG-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | True |
| Model | TBR84-RISZ1-L-S-GGG-1 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 17148 MB |
