True TBR84-PTSZ1-L-B-SSS-SSS-1 handleiding

Koelkast

True

40 pagina's

PDF beschikbaar

Handleiding

TBR

TDR SERIES www.truemfg.com

TEC_TM_043 | REV. F | EN03/2/2023 Page 12 of 40 P#803294

Cabinet Setup (cont.)

Air Distributor Manifold & Distributor Cover

A 2-way air distributor manifold is included to allow a single CO₂

supply line to pressurize two kegs. The air distributor is located

behind the distributor cover. To access, lift the cover off the

manifold mounting bracket. See figs. 1 and 2.

WARNING – Contents under pressure. Take care

when handling filled CO tanks. If unfamiliar

with using CO tanks and/or regulators, seek

information from your local distributor or brewer

representative before proceeding.

Fig. 1. LIft the distributor cover.

Fig. 2. The 2-way distributor manifold.

CO & Keg Connections

NOTE: CO cylinders, regulators, and keg tappers are not

provided by TRUE.

Required Tools

Required tools include (but may not be limited to) the following:

• CO Cylinder

• Pressure Regulator

• Tapper

NOTE: Be sure to use hose clamps for all air and beer lines as

applicable.

Procedure

1. Attach a pressure regulator to your CO cylinder.

2. Connect the pressure regulator to the distributor manifold.

3. Connect the distributor manifold to your tapper(s).

4. Connect the draft tower beer line(s) to your tapper(s).

5. Attach the tapper(s) to your keg(s).

6. Open the pressure regulator valve and pressurize the system.

NOTE: It requires 1/2 lb (0.23 kg) of CO to dispense a half-

barrel of beer at 38˚F (3.3˚C) with 15 psi (1.03 bar) of pressure

on the barrel.

7. Engage your tapper(s)

8. Check all connection points for leaks. If the system leaks, verify

all fittings and clamps are tight and seal correctly.

Bekijk gratis de handleiding van True TBR84-PTSZ1-L-B-SSS-SSS-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.