Handleiding
Je bekijkt pagina 35 van 40
TBR
|
TDR SERIES
TEC_TM_043 | REV. F | EN
03/2/2023
Page 35 of 40
www.truemfg.com
Cabinet Adjustments, Servicing & Component Replacement (cont.)
Gasket Replacement
Tools Required
• Caulk gun
• Black 100% silicone
There are two types of door gaskets; narrow and wide gaskets (see
fig 1). The correct gasket for your unit varies by cabinet age and
model. The gaskets are NOT interchangeable.
NOTE: For narrow gaskets, it’s important to remember which
track the gasket was removed from. Normally, the gasket is in
the center track on the top, bottom, and handle sides. On the
hinge side, it's on the inside track.
Procedure
1. From the upper right or left-hand corner, carefully pull
removable gasket away from the door. See fig. 2.
2. Apply silicone to each corner of the door/gasket channel. See
fig. 3.
3. After applying silicone to the corners, push the gaskets back
into their original tracks. Press corners in
NOTE: The silicone will seal any possible air leaks. Excess
silicone should seep out of the track.
4. Clean any excess silicone.
NOTE: Gasket color may vary depending on unit.
Fig. 1. There are two gasket types. A: Narrow gasket; B: Wide gasket.
Fig. 2. Pull the gasket starting at an upper corner.
Fig. 3. Apply silicone to each corner of the gasket channel.
Fig. 4. It is common to see silicone pushed out of track around the gasket. This is
how you know enough silicone was used.
A
B
Bekijk gratis de handleiding van True TBR60-RISZ1-L-S-SS-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | True |
| Model | TBR60-RISZ1-L-S-SS-1 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 17148 MB |
