Handleiding
Je bekijkt pagina 13 van 23
EN 13
local air conditioner PAC 2015 E
The device gets very warm, is loud or is losing power:
• Check the air inlet and air filter for dirt. Remove external
dirt.
• From the outside, check the device for dirt (see chapter
Maintenance). If the inside of the device is dirty, have it
cleaned by a specialist company for cooling and air-
conditioning or by the manufacturer.
The device does not respond to the infrared remote control:
• Check whether the distance between remote control and
device is too large and reduce it if necessary.
• Make sure there are no obstacles, such as furniture or
walls, between the device and the remote control. Ensure
visual contact between device and remote control.
• Check the charging status of the batteries and change
them if required.
• If the batteries have just been changed, check them for
correct polarity.
The device still does not operate correctly after these
checks:
Please contact the customer service. If necessary, bring the
device to a specialist company for cooling and air-conditioning
or to the manufacturer for repair.
Error codes
The following error messages can be displayed on the segment
display(13):
Error code Cause Remedy
E1 Error at the room
temperature
sensor
Disconnect the device briefly
from the mains.
Should the error still be
displayed after the restart,
please contact the customer
service.
E2 Error at the tem-
perature sensor of
the evaporator
Disconnect the device briefly
from the mains.
Should the error still be
displayed after the restart,
please contact the customer
service.
Bekijk gratis de handleiding van Trotec PAC 2015 E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Trotec |
| Model | PAC 2015 E |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2944 MB |
