Handleiding
Je bekijkt pagina 9 van 20
VIII. a - THE EPICON CONTROL - OVERVIEW:
Traulsen blast chillers are equipped
with our exclusive epicon control.
This has a durable, water resistant,
touch screen interface for ease of
use, and is surrounded by a heavy
gauge metal frame to protect it from
damage.
The epicon control can be used in
one of two distinct operating modes:
AUTO or MANUAL.
VIII. b - MODES OF OPERATION:
The rst mode of operation is AUTO. This is designed to
start a chill cycle whenever one or more probes is placed
into product above 90 degrees F, insuring proper operation.
MANUAL is a fully adjustable mode which allows the
operator to select from a wide range of chill settings.
VIII. c - CHILL PROGRAMS:
Within the AUTO and MANUAL modes of operation, the
operator can select that the chill cycle be regulated by
either product core temperature, time, or by a previously
prepared recipe.
Temp: Cycle ends upon reaching target temp.
Time: Cycle ends upon time elapsing.
Product: Chill according to an previously saved
product “recipe.”
VIII. d - OPERATING METHODS:
The EPICON control also allows the operator to select from
different cycle types, including Standard, Speed, Energy
and Delicate.
Standard: Basic blast chill or freeze cycle.
Speed: Provides for fastest possible chilling.
Energy: Slightly slower chilling in a more
energy efcient manner.
Delicate: Chill products prone to freezing
with warmer, slower air.
VIII. e - MAINTENANCE MODE:
At the end of every chill or freeze cycle the blast chiller will
automatically switch to MAINTENANCE MODE. In this
mode the cabinet will revert to a holding cabinet, where it
will maintain an air temperature consistent with the target
temperature. For example if the target temp was set at
-8-
VIII. THE EPICON CONTROL
The Idle Screen
(indicates the chiller is in
hold mode)
Fig. 2
Fig. 3
Factory Default
Passwords
• USER: No password
• SUPERVISOR: 1234*
• SERVICE: 4401
*Can be changed if
needed.
VIII. e - MAINTENANCE MODE:
37°F than the hold temp will be 37°F. If the target temp was
0°F than the hold temp will be 0°F.
Regardless of cycle type or target temperature, after pressing
DONE for all probes or zones the chiller will automatically
operate in IDLE MODE at 37°F.
VIII. f - THE TOOL BOX:
The toolbox allows the operator to adjust
default operating parameters, update
control software, retrieve past chill cycle
data, monitor chiller operation, and make
use of service diagnostics.
To access the TOOLBOX features press the toolbox icon
on the MANUAL menu. The SECURITY LEVEL screen
will appear (g. 2). Some areas of the control are password
protected. Selecting a secure area will prompt a keyboard
to appear on the display.
The most common operations are included inside the non
password protected USER MENU (g. 3).
VIII. g - FOOD PROBES:
Three food probes are provided, numbered
1 thru 3 to help the operator identify different
products and/or batches. Each probe’s activity
status is indicated on the display as:
INACTIVE: Probe is available for placing in hot product.
ACTIVE: Probe has been inserted into hot product, but
chill cycle has not yet been started.
IN USE: Cycle in progress, product core temperature is
displayed underneath the probe icon on the
run screen.
DONE: Displayed on the RUN screen, this indicates
that it’s cycle has been completed and product
is ready to remove.
VIII. h - USB PORT:
A standard USB data port is provided. This allows the
operator to download chill cycle data on to a thumb drive for
easy transer to a PC. It is also used to update the control’s
operating software.
Bekijk gratis de handleiding van Traulsen TBC1HR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Traulsen |
| Model | TBC1HR |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3760 MB |
