Handleiding
Je bekijkt pagina 16 van 20
7. MICROPROCESSOR CONTROL (cont’d)
G SERIES
Page 15
7Q - HOT FOOD - UNLOCKING THE KEYPAD:
Normally, the keypad is locked to prevent inadvertent changes to settings. The Unlock Key is
a white dot on the right side of the display, centered between the other 4 keys.
• Press the Unlock Key twice within a second in order to unlock the keypad (think “tap-tap”).
• The Keypad Unlock LED will turn on to indicate the keypad is now live.
The keypad lock is different from the menu password. The keypad is locked to prevent accidental changes. Once the
keypad is unlocked, it is possible to access the menu system. The menu system is password protected. It is necessary to
enter a password in order to view or modify parameters.
The keypad will stay unlocked until there is 3 minutes of inactivity, at which time the controller will automatically lock the
keypad.
7R - HOT FOOD - ADJUST THE SETPOINT - MENU SYSTEM:
This parameter sets the desired cabinet temperature. Please note that hot food units are delivered from the factory set to
the ON position. This parameter is preset at the factory to 145 °F and should set to meet the customer’s requirements.
The setpoint for the unit can be changed from the Menu System. There will be a minimum and maximum value allowed
for the set point. The keypad must be unlocked to access the menu system.
• Follow the instructions to enter the customer password and Settings submenu.
• Press the Enter Key to enter the Settings submenu.
• Use the Plus Key until the Setpoint parameter is displayed.
• Press the Enter Key to display the value of the setpoint .
• Press the Modify Key and the value will ash, indicating it is being modied
• To raise the setpoint, press the Plus Key to increment to the set point.
Press the Minus Key to lower the setpoint.
• When the desired value is reached, press the Enter Key to lock in the value.
7S - HOT FOOD - CHANGE THE TEMPERATURE SET POINT (SHORT CUT):
The simplest way to change the temperature set point is using the short cut from the Main Display. The set point can also
be congured from the Menu System (see page 10). The setpoint to the unit can be changed by pressing and holding the
Plus Key or the Minus Key. Their will be a slight delay at rst to prevent an accidental change, so it will be necessary
to hold the key for 2 – 3 seconds until the value starts to ash. The ashing value indicates the setting is being modied.
The keypad must be unlocked in order to change the setpoint using the shortcut method.
• Press the Unlock Key twice within a second in order to unlock the keypad (think “tap-tap”).
• The Keypad Unlock LED will turn on to indicate the keypad is now live.
• To raise the setpoint, press and hold the Plus Key to increment to the set point.
Press the Minus Key to lower the setpoint.
• The value on the display will ash.
• When the desired value is reached, press the Enter Key to lock in the value.
• Pressing the Esc Key at any step will abort the process (before the Enter Key is pressed).
7T - HOT FOOD - TURN THE UNIT OFF:
After the temperature has been set, the customer can continuously turn the unit OFF and then
back ON to the same temperature. The keypad must be unlocked in order to de-activate the
hot food unit.
• Press the Unlock Key twice within a second in order to unlock the keypad (think “tap-tap”).
• The Keypad Unlock LED will turn on to indicate the keypad is now live.
• Press and hold the Unlock Key until the display shows “oFF”.
• To turn the unit ON, press the Unlock Key until the display shows the temperature.
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
Plus (+)
/Next Key
Minus (-)
/Previous Key
Unlock Key
Keypad Unlock
LED
Enter Key
ESC Key
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
Unlock Key
Keypad Unlock
LED
oFF
Temperature
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
Unlock Key
Keypad Unlock
LED
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
SEt/Settings
Enter Key
Modify Key
Plus (+)
/Next Key
Minus (-)
/Previous Key
Bekijk gratis de handleiding van Traulsen G10010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Traulsen |
| Model | G10010 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3471 MB |
