Handleiding
Je bekijkt pagina 13 van 20
7K - SET DATE & TIME - MENU SYSTEM:
The internal timeclock must be set in order to allow defrost schedule feature to occur at the correct time of day. If the
clock is not set, the control assumes the time is 12 a.m. at the time power is supplied to the unit. The hours on a 24-hour
timeclock read the following way:
h01 = 1:00 a.m. h07 = 7:00 a.m. h13 = 1:00 p.m. h19 = 7:00 p.m.
h02 = 2:00 a.m. h08 = 8:00 a.m. h14 = 2:00 p.m. h20 = 8:00 p.m.
h03 = 3:00 a.m. h09 = 9:00 a.m. h15 = 3:00 p.m. h21 = 9:00 p.m.
h04 = 4:00 a.m. h10 = 10:00 a.m. h16 = 4:00 p.m. h22 = 10:00 p.m.
h05 = 5:00 a.m. h11 = 11:00 a.m. h17 = 5:00 p.m. h23 = 11:00 p.m.
h06 = 6:00 a.m h12 = 12:00 p.m. h18 = 6:00 p.m. h24 = 12:00 a.m.
• Follow the instructions to enter the technician password and Sensor submenu.
• Use the Minus Key until the Time parameter is displayed.
• Press and hold the Enter Key to display the current time in the controller. The Month will
be displayed rst, followed by the Day and then the Year. The Hours, Minutes and
Seconds will be displayed next. Continue to hold the Enter Key to display all elds in
the Date and Time. The elds are identied by the rst character:
o Month
o Day
o Year
o Hours
o Minutes
o Seconds
• Press the Modify Key and the Months eld will ash, indicating it is being modied.
• To change a particular Date/Time eld, press the Plus Key or the Minus Key to set the
eld to the desired value.
• When a Date/Time eld is acceptable, press the Enter Key to use the value.
• You must step through all six Date/Time elds to change any one eld.
7L - SET DAYLIGHT SAVINGS - MENU SYSTEM:
This parameter is used to adjust the 24-hour clock for Daylight Savings Time. Daylight Savings does not automatically
adjust and must be set manually. The keypad must be unlocked to access the menu system.
• Follow the instructions to enter the technician password and Settings submenu.
• Use the Minus Key until the Daylight Savings Time Flag is displayed.
• Press the Enter Key to display the value of the Daylight Savings Time Flag.
• Press the Modify Key and the value will ash, indicating it is being modied
• To change the temperature units, press the Plus Key to step through the list of choices:
daylight savings time or daylight standard time.
• When the desired setting is reached, press the Enter Key to lock in the value.
7. MICROPROCESSOR CONTROL (cont’d)
G SERIES
Page 12
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
Sensor
Minus Key
Time Parameter
Enter Key
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
Modify Key
Plus Key
Minus Key
Enter Key
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
SEt/Settings
Minus (-)
/Previous Key
Enter Key
Modify Key
Plus (+)
/Next Key
Daylight Savings
Time
Daylight Standard
Time
Bekijk gratis de handleiding van Traulsen G10010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Traulsen |
| Model | G10010 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3471 MB |
