Trade-Wind VSL460022BF handleiding
Handleiding
Je bekijkt pagina 5 van 10
Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 5
CONNECTING TO THE VENT PIPE
The VSL liner comes with a metal start collar welded in place. Attach the Start Collar to the duct with at least three
equally spaced screws. Also apply duct tape, preferably the metal type.
PART 3 Use and Care
WARNING!
Do NOT operate the blower / ventilator system without the filters in place, or with dirty, grease laden filters.
OPERATING CONTROLS:
Always activate the ventilator when using cooking appliances. For best performance, turn on the blower a few
minutes before starting to cook to establish an airflow pattern within the room. To use the electronic touch control,
touch the button that corresponds to the desired speed. To turn off blower, touch the illuminated speed button
again or the illuminated blower off control button. The electronic light control when touched comes on high; touch
again for night light setting, touch again for light off. The inline and remote blower options come with knobs. To use
these controls, adjust the fan speed by simply turning the knob. To turn off blower, turn knob to off position. For
controlling the lighting, turn the corresponding knob; the light comes on high and adjusts to the night light setting.
ENERGY SAVING TIPS:
Eliminate air currents in the liner vicinity by shutting nearby windows and doors, turning off ceiling fans and
adjusting the adjacent heating and air conditioning outlets if necessary. Place your largest pans on the rear
burners whenever possible. Clean filters and grease laden surfaces often to improve efficiency. Always use lids on
cookware to retain heat and moisture. Minimize the amount of liquid used to cook food. Select cookware of proper
size, material and construction for the cooking task being performed.
CARE & CLEANING:
Proper cleaning is necessary to maintain performance and appearance, while also ensuring safe operation. The
frequency of cleaning should be according to the type and amount of cooking. Best results will be achieved by
cleaning soiled components as soon as possible. Filters must be cleaned regularly. Using the aluminum knob,
lightly pull the filter toward the front of the liner while pulling the backside downwards. Replacing the filter is just as
easy as taking it out. For visual instructions on how to remove the filters visit our YouTube page
(https://www.youtube.com/channel/UCwVIbi_9hbuIATTYvz43oBA).
The filters may be cleaned by hand washing in hot water using a mild detergent solution, or by placing them in a
dishwasher. Locate holes on the sides of the filter. Put filter in dishwasher with holes facing up so detergent can
enter filters. Dry the filters completely before using again. Rinse and dry with a soft lint-free cloth. Always wipe
stainless steel surfaces with the grain. Never wipe across the grain. After cleaning, reinstall the filters carefully.
>> Most common scrubber type pads will scratch the hood.
CAUTION:
If a commercially available stainless steel cleaner is used, it is important to read the labels for chlorine compounds.
Chlorine is a corrosive substance, DO NOT USE. Follow polish manufacturer’s instructions.
LED LIGHT BULBS:
Trade-Wind
®
liners are designed for MR16/GU10 LED flood light bulbs. They can be purchased at most home or
grocery stores. The bulbs provided with the unit are 3.5 watt, 350 lumen, and 3000K (color temperature).
Bekijk gratis de handleiding van Trade-Wind VSL460022BF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Trade-Wind |
| Model | VSL460022BF |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 1961 MB |
