Tracer Snap 3.5S-WF handleiding
Handleiding
Je bekijkt pagina 10 van 58
Instruction manual
10
EN
Tracer SNAP 3.5S-WF
2. On/O button
Press and hold the button for a long time (approx. 3s) to switch the
device on.
Press the button again to switch the camera o. 3.
3. It is necessary to install a microSD memory card in the slot before or
just after switching the camera on.
• The camera, if there is no memory card in it will communicate that
there is no memory card until it is installed. If you do not want to in-
stall a memory card, you can mute the messages in the application
when you connect to the camera.
4. The car camera has a built-in speaker and microphone to record and
play back background sounds.
LED:
• Blue light ashes once every 1 second - recording in progress
• Blue light ashes once every 3 seconds - loop recording in progress
• No light: device switched o
• Blue light ashes more than once every 1 second - software refresh
in progress
• Blue light does not ash, stays ON continuously - device on. Connect
via WiFi to the app.
VIIDURE WiFi application of the camera
Your car DVR has a wireless WiFi connection to your phone or tablet.
Once the appropriate application has been installed and the camera is
connected, the phone can be used as a screen on which to observe the
road and also to modify the camera settings.
1. Scan the QR code below and follow the instructions to install the ca-
mera app. The VIIDURE app.
Bekijk gratis de handleiding van Tracer Snap 3.5S-WF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tracer |
| Model | Snap 3.5S-WF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5047 MB |
