Tracer Opti 3D-WF handleiding
Handleiding
Je bekijkt pagina 16 van 75
Instruction manual
16
EN
Tracer OPTI 3D-WF
Dash camera installation
1. Turn o the car engine
2. Insert a memory card into the slot in the camera (use cards of class
10 or higher)
3. Try to place the camera in the space behind the rear view mirror and
the windscreen. (Special lms are included to allow you to stick and
later easily move the camera to another desired area)
The car charger cable can be placed along the edge of the car wind-
screen.
4. Adjust the position of the camera to ensure that the lens is at the cor-
rect level and showing the correct space.
5. Connecting the Rearview Camera:
The rearview camera should be connected via cable to the appro-
priate port on the front camera.
To ensure that the screen automatically switches to the rear camera
image when reverse gear is engaged, connect the red wire from the
rear camera extension to the +12V terminal of the reverse light. It is
recommended to use a qualied workshop and a trained installer.
Bekijk gratis de handleiding van Tracer Opti 3D-WF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tracer |
| Model | Opti 3D-WF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5885 MB |
