TP Link Omada OC400 handleiding
Handleiding
Je bekijkt pagina 36 van 475
28
Chapter 3
Manage Omada Managed Devices and Sites
1. Set up the Network
■ Scenario 1: Across VLANs or Subnets
As shown in the following figures, the controller and devices are in different VLANs or subnets. You need
to set up a layer 3 interface for each VLAN or subnet, and make sure the interfaces can communicate
with each other.
Gateway
Internet
AP AP
Switch
Unied
Management from
One Interface
Gateway
Switch
APs
Site
Omada SDN Controller
Interface 1 Interface 2
VLAN 1 VLAN 2
Gateway
Internet
AP AP
Switch
Interface 1 Interface 2
Subnet 1: 192.168.0.0/24 Subnet 2: 192.168.1.0/24
Unied
Management from
One Interface
Gateway
Switch
APs
Site
SDN Controller
■ Scenario 2: Across LANs
As shown in the following figure, the controller and devices are in different LANs. You need to
establish communication across the internet and the gateways.
By default, devices in LAN 1 cannot communicate with the controller in LAN 2, because Gateway B
is in front of the controller and block access to it. To make the controller accessible to the devices,
you can use Port Forwarding or VPN.
Bekijk gratis de handleiding van TP Link Omada OC400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TP Link |
| Model | Omada OC400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 86105 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | 440 mm |
| Diepte | 180 mm |
| Hoogte | 44 mm |
| LED-indicatoren | Ja |
