TP Link Kasa Smart KS205P3 handleiding
Handleiding
Je bekijkt pagina 1 van 2
©2023 TP-Link 7106510022 REV1.0.0
Smart Wi-Fi Light Switch
Quick Start Guide
*Images may dier from your actual product.
Flip the page over to complete setup.
Wire Your Switch
Turn o the circuit breaker. Then remove
the old wallplate of the wall switch and
label the wires.
1
Ground: Usually green or copper.
Neutral: Usually white, not connected to the dumb switch.
Line/Load: Usually black, and connected to the dumb
switch.
Note: If you are unsure, consult a qualied electrician.
Attach the wallplate and the wiring is
nished. Then turn on the circuit breaker.
5
Line up the switch with the mounting
holes. Secure it with screws.
4
Disconnect wires from the old switch.
2
Connect the wires to the smart switch as
shown below.
Note: No need to distinguish between Line and Load wires.
3
Take care to avoid electric shocks.
Bekijk gratis de handleiding van TP Link Kasa Smart KS205P3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TP Link |
| Model | Kasa Smart KS205P3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 408 MB |
