TP Link EAP723 handleiding
Handleiding
Je bekijkt pagina 11 van 129
6
1.2 Connect Network Devices
To connect your EAPs to the local network, refer to the following topology.
1.2.1 Connect Common APs
EAP Bridge AP (Main AP) Bridge AP (Client AP
)
Wireless Bridge
EAP
Management Clients
Gateway/Router
Note:
• Before you start, be sure to power up and connect your devices according to the above topology.
• A DHCP server (typically a gateway/router with the DHCP function enabled) is required to assign
IP addresses to the EAPs and clients in your local network.
1. Connect your gateway/router to the internet.
2. Connect the EAPs to the LAN ports of your gateway/router.
For a Bridge kit product, connect one EAP to your gateway/router. This EAP will work
as the Main AP. The other EAP in the kit will automatically connect to the Main AP via
wireless bridge and work as the Client AP (Sub AP).
3. Connect your wireless clients such as phones, tablets and laptops to the WiFi of an
EAP. The default SSIDs are printed on the EAP.
4. Now you can surf the internet on your phones, tablets and laptops. For network
security, we recommend that you further complete the initial setup.
Note:
If you cannot access the internet, follow the FAQ to troubleshoot the problem.
Bekijk gratis de handleiding van TP Link EAP723, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TP Link |
| Model | EAP723 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12083 MB |
