TP Link EAP653 UR handleiding
Handleiding
Je bekijkt pagina 8 van 41
- 8 -
Triggers the device to perform a reset operation.
Syntax:
cliclientd reset
Note:
Some models, such as Wi-Fi7 products or Wi-Fi5 models that have not fully adapted the
new functions of Omada Controller v5.9, may not support this command yet. And they will
gradually adapt to this command in the near future, please follow the TP-Link official website
to get the latest firmware in time.
Example:
/bin $ cliclientd reset
Reset Success
3.2 restart
Description：
Triggers the device to perform a reboot operation.
Syntax:
restart
Note:
The commands supported by different models to reboot the device may not be consistent.
For example, EAP772 V2 supports both reboot and restart, while the EAP650-Outdoor V1
only supports restart. And the command to trigger AP reboot will be changed to restart
uniformly in the near future.
Example:
/bin $ restart
3.3 iwconfig
Description:
This command can be used to view the status information of all the wireless interfaces of
EAP, including the identification name (ESSID), working mode, operating frequency,
transmission rate, and signal strength of each interface, etc.
Bekijk gratis de handleiding van TP Link EAP653 UR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TP Link |
| Model | EAP653 UR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5519 MB |
