TP Link EAP653 UR handleiding
Handleiding
Je bekijkt pagina 2 van 41
- 2 -
1 Overview
TP-Link Omada/Omada Pro/Festa EAPs provide Command Line Interface (CLI) for
debugging. This guide introduces detailed information about the debug commands to facilitate
troubleshooting and locating the fault when the EAP encounters an exception.
With these commands, you can:
1. Perform channel scanning to analyze the Wi-Fi environment; view the wireless
information, including the settings and statistics of the EAP’s wireless interfaces, and
the statistics of clients, etc.
2. Invoke built-in tools, including ping, tcpdump, iPerf.
3. Manage the hostapd logs: determine the level of logs to be outputted, the output
method, and the size of log files to be saved in /tmp/logdump.
Currently, all EAPs that are still being updated and maintained (that is, not in EOL status)
apply to the commands in this document to varying degrees. If you encounter some commands
that do not take effect as described in the guide during the use of these commands, please keep
an eye on the TP-Link official website to upgrade your device to the latest firmware released if
possible. If it still doesn’t work, you can report it to the TP-Link Technical support center or
R&D department. We will provide you with timely assistance and guidance.
Kindly note: the commands displayed in the terminal by entering cliclientd -h may be not
supported completely by the device you are using, please refer to this document for specific
support of the device. In the future, if the commands supported by EAP are added or improved,
we will update them simultaneously in this document.
Bekijk gratis de handleiding van TP Link EAP653 UR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TP Link |
| Model | EAP653 UR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5519 MB |
