Handleiding
Je bekijkt pagina 20 van 21
20
TROUBLESHOOTING (CHECK POINT)
16
The unit does not operate Cooling or Heating is abnormally low
• The power main switch is
turned off.
• The circuit breaker is
activated to cut off the
power supply.
• Stoppage of electric
current.
• ON timer is set.
• The filters are blocked with dust.
• The temperature has been set
improperly.
• The windows or doors are opened.
• The air inlet or outlet of the outdoor unit
is blocked.
• The fan speed is too low.
• The operation mode is FAN or DRY.
• POWER SELECTION function is set
75% or 50% (This function is depend
on remote controller).
REMOTE CONTROL A-B SELECTION
17
To separate using of remote control for each indoor unit in case of
2 air conditioners are installed nearly.
Remote control B setup
1. Press RESET button on the indoor unit to turn the air conditioner ON.
2. Point the remote control at the indoor unit.
3. Push and hold
button on the Remote Control by the tip of the
pencil. “00” will be shown on the display. (Picture
࣬
)
4. Press
during pushing . “B” will show on the display and
“00” will disappear and the air conditioner will turn OFF.
The Remote Control B is memorized. (Picture
࣭
)
NOTE
1. Repeat above step to reset Remote Control to be A.
2. Remote Control A has not “A” display.
3. Default setting of Remote Control from factory is A.
Bekijk gratis de handleiding van Toshiba RAS-H13B2ACV2G-M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toshiba |
| Model | RAS-H13B2ACV2G-M |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2542 MB |
