Handleiding
Je bekijkt pagina 39 van 42
English - 38 -
• Check whether TV Speaker is selected at Home>-
Settings>Sound>Audio Output.
My TV cannot connect to the network.
• Check network status at Home>Settings>Support>
Self Diagnosis>Network Connection Status.
• Make sure your modem/wireless router is on and
connected to the Internet.
• Position your wireless router, modem router, or
access point in a central location. Avoid putting it
in a corner.
External source connected but no picture or
sound.
I have connected an external source to my TV but I
get no picture and/or sound.
• Check whether the connection between the external
device and your TV is correct and secure.
• Make sure you have made the correct selection of
input source.
• If the signal is intermittent, unplug the TV power cord
from AC outlet and re-plug after 60 seconds.
When devices are connected with HDMI cables
• If there is always no signal, or the signal cannot be
restored after plugging and unplugging, you can
access Home>Settings>Connection>HDMI &
CEC>HDMI Format, to conrm whether the signal
can be recognised.
• Change to another HDMI port.
• Change to another HDMI cable.
The remote control does not work.
• Conrm that TV still has power and is operational.
Press the control button on the TV to determine if the
problem is with the remote control or not.
• If the TV is not responding to the remote control, then
please check if the small light on the remote control
ashes when any button is pressed (some remote
controls do not support this function).
• If the small light does not ash when the remote
control button is pressed, the battery power may
be low, please replace the batteries with new ones.
• Check that the orientation of each battery matches
the positive (+) and negative (-) symbols in the battery
compartment.
• Keep the remote control sensor area clear from
obstacles.
For Bluetooth remote controls
• If the TV does not respond with the Bluetooth remote
control, try pairing the remote control to the TV by
pressing and holding the Menu button for at least
3 seconds.
Schedule Recording cannot be used.
• Check if there is a storage device connected to
the TV.
• Check the free space of the storage device. The
function will not work if there is not enough storage
space on the device.
• Check whether your storage device is damaged. If
so, it is suggested to format your storage device.
• Recording will automatically stop if the signal
becomes too weak.
Note:
• Recording function may not work if the read/write speed of
the USB device is too slow.
• Recording function may not work because the storage format
of your device is unsupported.
• The Recording functions may not be applicable in some
models/countries/regions.
TV Status Diagnosis
Press the Home button on your remote control and
select Settings>Support>Self Diagnosis.
When the TV malfunctions, you can perform some
self-diagnosis to nd the problem.
Network Connection Status
View the TV’s network connection information.
Network Connection Test
When performing a Network Connection Test, the test
will conrm whether your TV is connected to a network
via the TV screen. If the network test is successful but
you still have problems using online services, please
contact your Internet provider.
Network Speed Test
Test the speed with a third-party website.
Input Connection Test
When performing an Input Connection Test, you
can select from the input sources and check related
information with external connections.
Status Check
When performing a Status Check, the status of your
TV will be displayed showing any error codes.
Signal Info
Show the signal information of current input.
Bekijk gratis de handleiding van Toshiba 75UV2F53DB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toshiba |
| Model | 75UV2F53DB |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5285 MB |
