Handleiding
Je bekijkt pagina 24 van 50
English - 23 -
(**) Limited Models Only
the TV via the remote again, press and hold the “0-
Zero” button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the
related option under the Settings>Devices menu
accordingly.
The TV supports ARC (Audio Return Channel). This
feature is an audio link meant to replace other cables
between the TV and an audio system (A/V receiver or
speaker system).
When ARC is active, the TV will mute its other audio
outputs, except the headphone jack, automatically and
volume control buttons are directed to the connected
audio device. To activate ARC set the Sound Output
option in the Settings>Sound menu as HDMI ARC.
Note: ARC is supported only via the HDMI2 input.
Enhanced Audio Return Channel (eARC)
Similar to ARC, the eARC feature enables the transfer
of the digital audio stream from your TV to a connected
audio device via the HDMI cable. eARC is an improved
version of ARC. It has a much higher bandwidth than
its predecessor. Bandwidth represents the range of
frequencies or amount of data that is being transferred
at a time. Higher bandwidth translates into a higher
amount of data that can be transferred. Higher
bandwidth also means that digital audio signal doesn’t
have to be compressed and is much more detailed,
rich, and vibrant.
When eARC is enabled from the sound menu, TV
first tries to establish eARC link. If eARC is supported
by the connected device, the output turns into eARC
mode and the “eARC” indicator can be observed on
the connected device’s OSD. If an eARC link cannot
be established (for example, the connected device
is not supporting eARC but supporting ARC only) or
if eARC is disabled from the sound menu, then TV
initiates ARC.
For eARC to function properly;
• The connected audio device should also support eARC.
• Some HDMI cables do not have enough bandwidth to
carry high-bit-rate audio channels, use an HDMI cable
with eARC support (HDMI High Speed Cables with
Ethernet and the new Ultra High Speed HDMI Cable
- check hdmi.org for latest info).
• Set the Sound Output option in the Settings>Sound
menu to HDMI ARC. The eARC option in the Sound
menu will be enabled. Check to see if it is set to On.
If not, set it to On.
Note: eARC is supported only via the HDMI2 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with
the TV. The volume can be controlled using the re-
mote control of the TV. To activate this feature set the
Sound Output option in the Settings>Sound menu
as HDMI ARC. When HDMI ARC option is selected,
CEC option will be set as Enabled automatically, if it
is not already set. The TV speakers will be muted and
the sound of the watched source will be provided from
the connected sound system.
Note: The audio device should support System Audio Control
feature.
Quick AI (**)
You can use Quick AI option in the TV menu in
order to manage your AI setting preferences. AI on
Sound, AI on Video and AI for You options will be
available. Highlight an option and press OK to select
or unselect. Then highlight OK and press OK to apply
your changes.
AI on Sound: Works on TV source. When enabled, TV
checks programme genre and adjusts sound settings
accordingly if genre information is available.
AI on Video: Works on TV source. When enabled, TV
checks programme genre and adjusts picture settings
accordingly if genre information is available.
AI for You: When enabled, TV detects your presence
in the room and activates your settings. When activated
you will be asked to start a search for mobile phones
in the room. Highlight Yes and press OK, available
phones will be listed. Select your mobile phone from
the list of devices. Follow the on screen instructions
to learn more. Then you will be asked to set Picture
Mode, Mode (Sound) and Favourites (channel list)
options according to your preferences. When TV
detects your mobile phone in the room your selections
will be applied. A message will be displayed on the
screen when the TV detects your phone in order to
inform about the setting changes.
If all options are activated, AI on Sound and AI on
Video options will have higher priority in comparison
with AI for You. It means that picture and sound
settings will be adjusted automatically according to the
programme type instead of the selections you made
while setting the AI for You option.
A small icon and information message will be displayed
on the screen when settings are changed via AI on
TV feature.
Game Mode
You can set your TV to achieve lowest latency for
games. Go to Settings>Picture menu and set the
Mode option to Game. Game option will be available
when the TV’s input source is set to HDMI. When set
the picture will be optimised for low latency.
Auto Low Latency Mode
You can also enable the ALLM (Auto Low Latency
Mode) option in the Settings>Devices menu. If this
function is enabled the TV automatically switches the
picture mode to Game when ALLM mode signal is
received from the current HDMI source. TV switches
back to previous picture mode setting when the ALLM
Bekijk gratis de handleiding van Toshiba 65UK3163DA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toshiba |
| Model | 65UK3163DA |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 6695 MB |
