Handleiding
Je bekijkt pagina 26 van 47
English - 25 -
(**) Limited Models Only
Advanced Settings
Equalizer
Selects the equalizer mode. Custom settings can be made only when in User mode.
Bass Gain
Controls the bass gain level. Use Left or Right button to set.
DTS DRC
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the DTS DRC by setting as On or Off.
Sound Mode
You can select a sound mode (if the viewed channel supports).
Digital Out
Sets digital out audio type. PCM, Auto, and Passthrough options will be available.
PCM: This option provides two-channel uncompressed digital audio output. You can
use this option if you experience compatibility problems such as not hearing sound.
Auto: This option provides multi-channel digital audio output (up to 5.1 channel).
Passthrough: This option provides original audio output as such in HDMI ARC. It is
recommended to use this option if you have an A/V receiver with eARC support. If your
A/V receiver does not support source audio format you may experience compatibility
problems such as not hearing sound.
Headphone
Sets headphone volume. This option will not be available if the Sound Output option
is set as Lineout.
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Balance
Sets sound balance. This feature will be activated if Sound Output option is set as TV
or Headphone Only. Balance item adjusts the balance level of the TV speakers and
headphones together.
Reset
Resets some of the sound settings to factory defaults.
Network Menu Content
Network Type
Disable the network connection or change the connection type.
Scan Wireless
Networks
Start a search for wireless networks. This option will be available if the Network Type
is set as Wireless Device.
Disconnect
To disconnect from a wireless network and delete your saved wireless network profile (if
previously saved), highlight this option and press OK. This option will not be available
if you did not connect to a wireless network. Refer to Connectivity section for more
information.
Press WPS on your
wifi router
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press OK. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Internet Speed Test
Start a speed test to check your connection bandwidth. The result will be displayed on
the screen when finished.
Advanced Settings
Change the IP and DNS configurations of your TV.
Networked Standby
Mode
Enable or disable this feature by setting it as On or Off.
Note: For detailed information on the options of this menu refer to the Connectivity section.
Installation Menu Content
Automatic channel
scan (Retune)
Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.
D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
analogue stations. Satellite:Searchesandstoressatellitestations.
Manual channel
scan
This feature can be used for direct broadcast entry.
Bekijk gratis de handleiding van Toshiba 65UF3F53DB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toshiba |
| Model | 65UF3F53DB |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 6223 MB |
