Handleiding
Je bekijkt pagina 8 van 43
English - 7 -
(**) Limited Models Only
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Plug one end (the two-hole plug) of the supplied
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet. The TV will switch to standby mode.
Note: The position of the power cord inlet may dier depending
on the model.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights
up. To switch on the TV from standby mode either:
• Press the Standby, Guide, Home, Netix, Prime
Video, Disney+, Rakuten TV, YouTube, free,
sports or deezer button on the remote control.
• Press the control button on the TV.
The TV will then switch on.
Note: The remote control buttons may vary depending on
models/countries/regions.
To switch the TV into standby
• Press the Standby button on the remote control.
• Press the control button on the TV, Mixbar menu
options will be displayed. The focus will be on
the current input source option. Press the button
consecutively until the Power Off option is
highlighted. The TV will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power
cord from the mains socket.
TV Control & Operation
Your TV has a single control button. This button allows
you to control the Inputs / Channel Up-Down / Volume
Up-Down and Power O-On functions of the TV.
Note: The position of the control button may dier depending
on the model.
Operating with the Control Button
• Press the control button to display the Mixbar menu
options.
• Then press the button consecutively to move the
focus to the desired option if needed.
• To use the Volume Up-Down function, press and hold
the button for about 2 seconds.
To turn the TV off: Press the control button to
display the Mixbar menu options, the focus will be
on the current input source option. Press the button
consecutively until the Power O option is highlighted.
To turn on the TV: Press the control button, the TV
will turn on.
To change volume: Press the control button to
display the Mixbar menu options and then press the
button consecutively to move the focus to Vol+ or
Vol- option. Press and hold the button to increase or
decrease the volume.
To change channel (on TV input source, Live TV
mode): Press the control button to display the Mixbar
menu options and then press the button consecutively
to move the focus to CH+ or CH- option.
To change input source: Press the control button
to display the Mixbar menu options, the focus will be
on the current input source option. Scroll through the
available input sources by pressing the button until the
desired input source option is highlighted.
Note: Live TV settings menu OSD in Live TV mode cannot be
displayed via the control button.
Operation with the Remote Control
Press the Home button to display or return to the
Home screen of your TV. Use the directional buttons
to move the focus, proceed, adjust some settings and
press OK to make selections in order to make changes,
set your preferences, enter a sub-menu, launch an
application, etc. Press Back/Return to return to the
previous menu screen.
Bekijk gratis de handleiding van Toshiba 43QV3F63DA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toshiba |
| Model | 43QV3F63DA |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5614 MB |
