Handleiding
Je bekijkt pagina 8 van 44

English - 7 -
(**) Limited Models Only
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Plug one end (the two-hole plug) of the supplied
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet. The TV will switch to standby mode.
Note:Thepositionofthepowercordinletmaydierdepending
on the model.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights
up. To switch on the TV from standby mode either:
• Press the Standby, Guide, Netix, Prime Video or
Freeview Play button on the remote control.
• Press the control button on the TV.
The TV will then switch on.
To switch the TV into standby
• Press the Standby button on the remote control.
• Press the control button on the TV, the function
options menu will be displayed. The focus will
be on the current input source option. Press the
button consecutively until the Power O option is
highlighted. The TV will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power
cord from the mains socket.
TV Control Button & Operation
Note:Thepositionofthecontrolbuttonmaydierdepending
on the model.
Your TV has a single control button. This button allows
you to control the Standby-On / Inputs / Channel Up-
Down and Volume Up-Down and Power O functions
of the TV.
Operating with the Control Button
• Press the control button to display the function
options menu.
• Then press the button consecutively to move the
focus to the desired option if needed.
• To use the Volume Up-Down function, press and hold
the button for about 2 seconds.
To turn the TV off: Press the control button to
display the function options menu, the focus will be
on the current input source option. Press the button
consecutively until the Power O option is highlighted.
To turn on the TV: Press the control button, the TV
will turn on.
To change volume: Press the control button to display
the function options menu and then press the button
consecutively to move the focus to Vol+ or Vol- option.
Press and hold the button to increase or decrease
the volume.
To change channel: Press the control button to
display the function options menu and then press
the button consecutively to move the focus to CH+
or CH- option.
To change input source: Press the control button to
display the function options menu, the focus will be
on the current input source option. Scroll through the
available input sources by pressing the button until the
desired input source option is highlighted.
Note: Main menu OSD cannot be displayed via the control
button.
Operation with the Remote Control
Press the Home button on your remote control to
display main menu. Use the directional buttons and
OK button to navigate and set. Press Back/Return,
Exit or Home button to quit a menu screen.
Input Selection
Once you have connected external systems to your TV,
you can switch to dierent input sources. Select the
desired input from the All Inputs menu on the Home
screen and press OK.
Changing Channels and Volume
You can change the channel and adjust the volume
by using the Programme +/- and Volume +/- buttons
on the remote.
Bekijk gratis de handleiding van Toshiba 43QV3363DG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Toshiba |
Model | 43QV3363DG |
Categorie | Televisie |
Taal | Nederlands |
Grootte | 5961 MB |