Handleiding
Je bekijkt pagina 7 van 53
English - 6 -
(**) Limited Models Only
Turning On/Off the TV(**)
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Plug one end (the two-hole plug) of the supplied
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet. The TV will switch to standby mode.
Note:
• Thepositionofthepowercordinletmaydierdepending
onthemodel.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights
up. To switch on the TV from standby mode either:
• Press the Standby, Guide, Netix, Prime Video or
Freeview Play button on the remote control.
• Press the control button on the TV.
The TV will then switch on.
Note:
• Theremotecontrolbuttonsmayvarydependingonmodels/
countries/regions.
To switch the TV into standby
• Press the Standby button on the remote control.
• Press the control button on the TV, the function
options menu will be displayed. The focus will
be on the current input source option. Press the
button consecutively until the Power O option is
highlighted. The TV will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power
cord from the mains socket.
Turning On/Off the TV(**)
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Plug one end (the two-hole plug) of the supplied
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet. The TV will switch to standby mode.
Note:
• Thepositionofthepowercordinletmaydierdepending
onthemodel.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights
up. To switch on the TV from standby mode either:
• Press the Standby, Guide, Netix, Prime Video or
Freeview Play button on the remote control.
• Press the control button on the TV.
The TV will then switch on.
Note:
• Theremotecontrolbuttonsmayvarydependingonmodels/
countries/regions.
To switch the TV into standby
• Press the Standby button on the remote control.
• Press the control button on the TV, the function
options menu will be displayed. The focus will
be on the current input source option. Press the
button consecutively until the Power O option is
highlighted. The TV will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power
cord from the mains socket.
Bekijk gratis de handleiding van Toshiba 40QV3F63DAZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toshiba |
| Model | 40QV3F63DAZ |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7298 MB |
