Handleiding
Je bekijkt pagina 7 van 43
English - 6 -
(**) Limited Models Only
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Plug one end (the two-hole plug) of the supplied
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet. The TV will switch to standby mode.
Note:
• Thepositionofthepowercordinletmaydierdepending
on the model.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights
up. To switch on the TV from standby mode either:
• Press the Standby, Guide, Netix, Prime Video or
Freeview Play button on the remote control.
• Press the control button on the TV.
The TV will then switch on.
Note:
• The remote control buttons may vary depending on models/
countries/regions.
To switch the TV into standby
• Press the Standby button on the remote control.
• Press the control button on the TV, the function
options menu will be displayed. The focus will
be on the current input source option. Press the
button consecutively until the Power O option is
highlighted. The TV will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power
cord from the mains socket.
TV Control & Operation
Your TV has a single control button. This button allows
you to control the Inputs / Volume Up-Down / Channel
Up-Down / Standby-On functions of the TV.
Note:
• The position of the control button may dier depending
on the model.
Operating with the Control Button
• Press the control button to display the function
options menu.
• Then press the button consecutively to move the
focus to the desired option if needed.
• To use the Volume Up-Down function, press and hold
the button for about 2 seconds.
To turn the TV off: Press the control button to
display the function options menu, the focus will be
on the current input source option. Press the button
consecutively until the Power O option is highlighted.
To turn on the TV: Press the control button, the TV
will turn on.
To change volume: Press the control button to display
the function options menu and then press the button
consecutively to move the focus to Volume Up or
Volume Down option. Press and hold the button to
increase or decrease the volume.
To change channel (on TV input source, Live TV
mode): Press the control button to display the function
options menu and then press the button consecutively
to move the focus to Channel Up or Channel Down
option.
To change input: Press the control button to display
the function options menu, the focus will be on the
current input source option. Scroll through the available
input options by pressing the button until the desired
input option is highlighted.
Note:
• Live TV settings menu OSD in Live TV mode cannot be
displayed via the control button.
Operation with the Remote Control
Press the Home button to display or return to the
Home screen of your TV. Use the directional buttons
to move the focus, proceed, adjust some settings and
press OK to make selections in order to make changes,
set your preferences, enter a sub-menu, launch an
Bekijk gratis de handleiding van Toshiba 24WV2463DB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toshiba |
| Model | 24WV2463DB |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 6094 MB |
