Toro 58355 handleiding
Handleiding
Je bekijkt pagina 53 van 99
Inspection And Cleaning
The muffler should be removed periodically to inspect
for excessive carbon build-up. Excessive deposits
around the exhaust ports or exhaust exit holes will
cause poor engine performance.
1. Check the inlet port of muffler for excessive
carbon deposits. Clean as required.
2. Inspect the baffle inside muffler for carbon build-
up. Clean baffle by scraping carbon as required.
Use a piece of wire to clear obstructions from
the small holes in baffle.
If carbon build-up can not be cleaned, replace the
muffler.
3. Inspect the muffler mounting holes for elongation.
Replace the muffler if the holes are elongated.
Muffler Reassembly
1. Install a new gasket and the exhaust exit tube
(for mufflers with removable exhaust tubes).
Secure the tube with 2 screws.
Torque the screws to 15-25 in•lb (1.7-2.8 N•m).
DISASSEMBLE MAJOR
COMPONENTS (cont.)
3.6089.059
2.6089.057
2.6089.058
Wire
3
DISASSEMBLY, INSPECTION, & REPAIR
3-28
Bekijk gratis de handleiding van Toro 58355, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toro |
| Model | 58355 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 35687 MB |
