Tornado VCRMCWC handleiding
Handleiding
Je bekijkt pagina 3 van 115
English 3
Battery and Charging
• Do not use batteries, adapters or power cords, charging
bases of any third-party. This product can only be used
with the battery, adapter, or power cord and charging base
supplied with the robot. Failure to do so, product damage,
electric shock, or fire due to high voltage may be resulted
in.
• It is forbidden to disassemble, repair or modify the battery
or charging base without permission.
• Do not place the charging base near a heat source, such
as heating radiator.
• Do not touch wires, sockets, or power adapters with wet
hands.
• Do not wipe or clean the charging contacts with a damp
cloth or wet hands.
• If the power cord is broken or fractured, please stop
using it immediately and purchase or replace it through
official channels.
• If you need to transport this product, please make sure
that the robot is turned off, and it is recommended to pack
it in the original packaging box.
• If the product will not be used for an extended period,
please turn off the robot after it is fully charged and store it
in a cool and dry place. Charge it at least once every three
months to avoid over discharge of the battery.
• Please use it under the condition that the power
supply voltage conforms to the voltage value marked
on the charging base. If the use area is vulnerable to
thunderstorms or unstable power supply voltage, it is
recommended to take appropriate protective measures.
• It is prohibited to use with any type of power converter,
otherwise the warranty will become invalid immediately,
and may pose a danger.
• If it becomes necessary to replace the robot battery,
please contact our customer service department. If the
wrong type of battery is used for replacement, it may
cause a safety accident.
• In case of battery leakage, be careful not to let the liquid
stick to the skin or clothes. Wipe it immediately with a
dry cloth and send it to the recycle bin or designated
maintenance point. Do not discard it indiscriminately.
• Turn off the power switch before removing the battery.
• The battery must be removed when scrapping this
product. Please dispose of the old batteries properly, and
do not discard the waste battery at will. Batteries contain
harmful substances that are harmful to the environment.
Please put them into the specified recycle bins according
to the local environmental protection regulations.
Laser safety information
• This laser distance sensor complies with the class 1
laser product standard of IEC 60825-1:2014 and does not
emit dangerous laser radiation. However, for better safety,
please avoid your family (especially children and pets)
from looking directly at the laser emitter at close range.
Bekijk gratis de handleiding van Tornado VCRMCWC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | VCRMCWC |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 17004 MB |
