Tornado TV280-W12-U handleiding
Handleiding
Je bekijkt pagina 10 van 20
10
Attaching the Handle to the Vacuum
• Thread the cord through the lower and upper cord guides on the back
of the vacuum bag (Fig. 1).
• Remove the handle bracket by removing the two screws (Fig. 2).
• Place handle onto the back of the vacuum, aligning holes with pegs (Fig. 3).
• Place the handle bracket back into position (Fig. 4).
• Secure with two screws removed in Step 2.
• Open the bag compartment to ensure a vacuum bag is in place.
• Your vacuum is now ready for use.
• If storing the vacuum, wrap the cord clockwise around the top and
bottom cord hooks. Fasten the plug to the wrapped cord using
the channel on the plug.
ASSEMBLY
Fig. 2Fig. 1
Fig. 4Fig. 3
NOTE: Do not plug in the vacuum until it is completely
assembled. The vacuum cleaner and the handle are
packed separately and require assembly.
Bekijk gratis de handleiding van Tornado TV280-W12-U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | TV280-W12-U |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 1559 MB |
