Tornado Pro Spotter TE010-G03-U handleiding

Niet gecategoriseerd

Tornado

19 pagina's

PDF beschikbaar

Handleiding

OPERATION

Filling the Pro Spotter

• Unplug the unit.

• Disconnect the solution and recovery tanks.

• Remove the upper recovery tank.

• Add water and/or chemicals to the lower solution tank. Fill only to the ﬁll line

indicated on the label on the inside of the solution tank. The tank will hold up to

3.5 gallons.

Operating the Pro Spotter

• Attach the solution hose to the quick disconnect in the pocket at the front of the

machine.

• Attach the vacuum hose to the vacuum inlet (handle) above the recovery tank lid.

• Turn the 3-way switch to use either the pump and vacuum or the vacuum alone.

(Allow approximately 30 seconds for the pump to prime).

• Use the hand tool to spray and recover the solution.

• The ﬂoat shut-off will disable the suction of the unit when the recovery tank is

full. The operator will notice a distinctive change in the sound of the vacuum

motor when the ﬂoat shut-off is activated. Empty the recovery tank, and then ﬁll

the solution tank, to resume cleaning.

Emptying the Recovery Tank

• Unplug the unit.

• Disconnect the solution line and vacuum hose.

• Unlatch the recovery tank from the base of the unit and remove.

• Remove the drain plug.

• Drain the tank over a suitable outlet for wastewater.

• Rinse the tanks after each use.

• Store the unit with the lid off of the recovery and allow it to air dry.

Bekijk gratis de handleiding van Tornado Pro Spotter TE010-G03-U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.