Tornado 99786 handleiding
Handleiding
Je bekijkt pagina 25 van 26
25
6. Check on the display
that the starting signal of
the suction motor is on.
7. Put the motor in stan-
dard mode if silenced.
8. Check that the suction motor cap is closed properly.
If the problem persists, please contact the authorized
technical assistance.
EXCESSIVE FOAM PRODUCTION
Check that low foam detergent has been used. Eventu-
ally add small quantities of anti foam liquid into the
recovery tank.
Please be aware that a bigger quantity of foam is
produced when the oor is not very dirty. In this case
please dilute detergent solution.
RECOMMENDED BRUSHES
PART NO. QTY DESCRIPTION USE
48914030 2 Brush, PPL 0.6 14” Normal oors
48914040 2 Brush, PPL, 0.9, 14” Smooth oors with small joints an persistent dirt
48914050 2 Brush, TYNEX, 14” Floors of resistant material and very dirty
48914060 2 Brush, 5-mix, 14” All types of oor
48803030 2 Pad holder w/center lock, 13” For 14” pads
MATERIAL CHARACTERISTICS
PPL Good wear resistance. Maintains characteristics with hot water up to 122
0
F (50
0
C). It is not
hygroscopic
NYLON Excellent wear resistance, even with hot water. It is hygroscopic
TYNEX Nylon bristles with grains of abrasive material. Use with caution in order not to mark the
oor or ruin the polishing
BRISTLES
THICKNESS
Thicker bristles are more rigid and must be used on smooth oor or oor with small joints.
On irregular oors with deep joints or relieves, it is recommended to use softer bristles
which penetrate more easily and deeper.
PAD HOLDER The pad is recommended to clean smooth oors.
Bekijk gratis de handleiding van Tornado 99786, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | 99786 |
| Categorie | Boenmachine |
| Taal | Nederlands |
| Grootte | 11930 MB |
