Tornado 99786 handleiding
Handleiding
Je bekijkt pagina 23 van 26
23
Check the wear of the squeegee rubber and eventually
replace it.
For the replacement it is necessary to:
1. Take off the squeegee (see under paragraph
“SQUEEGEE CLEANING”).
2. Disassemble the rear part of the squeegee (see under
paragraph “REAR SQUEEGEE RUBBER CHECK”).
3. Unscrew the wing nuts (1) and take off the front
rubber holder blade (2).
4. Replace the front rubber (3).
To reassemble the squeegee reverse the operations
above.
SIX-MONTHLY MAINTENANCE
SPLASH GUARD RUBBER CHECK
With the brushes assembled, the splash guards must
slightly touch the oor. If they are worn, they have
to be replaced. Just release the lever coupler placed
in the rear part of the brushes base group from the
ring placed at the free extremity of the metal strip to
take off the rubbers and to reinsert the new ones (see
under paragraph “SPLASH GUARD ASSEMBLY”).
This operation has to be carried out for both splash
guards”).
TROUBLESHOOTING GUIDE
The checking of all the other foreseen machine opera-
tions is left to the authorized technical assistance.
Never leave the batteries completely discharged for a
long time.
In case of alarm visualizations contact the technical
assistance.
If, with the key switch positioned clockwise to switch
on the machine, the display and other functions are
not activated, it is necessary to check the batter-
ies' connection to the machine (see under paragraph
“CONNECTION BATTERIES' CONNECTION AND
SWITCHING ON OF THE MACHINE”). If the prob-
lem persists, please contact the authorized technical
assistance.
THE SUCTION MOTOR DOES NOT WORK
1. Check that the emer-
gency system (1) is not
activated.
2. Use the key switch to
turn off and then on the
machine (2).
3. Check the battery charge
on the display.
4. Check on the display
that the starting signal of
the suction motor is on.
5. Check the suction motor connections.
If the problem persists, please contact the authorized
technical assistance.
BRUSHES MOTOR DOES NOT WORK
1. Check that the emer-
gency system (1) is not
activated.
2. Use the key switch to
turn off and then on the
machine (2).
Bekijk gratis de handleiding van Tornado 99786, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | 99786 |
| Categorie | Boenmachine |
| Taal | Nederlands |
| Grootte | 11930 MB |
