Tornado 99786 handleiding
Handleiding
Je bekijkt pagina 21 van 26
21
AUTOMATIC DISASSEMBLY OF THE
BRUSHES
Put the lever in central
position.
1. Turn on the machine
turning the key clockwise
(2).
2. Keep the button pressed
for a few seconds (3).
3. Turn off the machine.
CLEANING THE BRUSHES
Take off the brushes to clean them with a water jet (to
read how to do it see chapter “DISASSEMBLING
THE BRUSHES”).
CLEANING THE SQUEEGEE
Keeping the squeegee clean guarantees the best drying
result.
For its cleaning it is necessary to:
1. Take off the squeegee hose (4) from the coupling.
2. Disassemble the squeegee from its support (1) by
loosening the knobs (2) counterclockwise and sliding
the squeegee assembly off of the bracket.
3. Clean the internal part of the squeegee inlet elimi-
nating any residual dirt.
4. Clean the squeegee rubbers.
5. Reassemble all parts paying attention to put the
washers (3) into position, they are two for each knob,
so that they are assembled one under and the other on
top of each of the two slots present on the support.
WEEKLY MAINTENANCE
REAR SQUEEGEE RUBBER CHECK
Check the squeegee rubber wearing and eventually
turn it or replace it.
Bekijk gratis de handleiding van Tornado 99786, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | 99786 |
| Categorie | Boenmachine |
| Taal | Nederlands |
| Grootte | 11930 MB |
