Tornado 99786 handleiding
Handleiding
Je bekijkt pagina 13 van 26
13
INSTALLING THE BATTERIES
The standard machine is provided with the batteries
set on lead/acid.
For different settings see chapter
“BATTERY SETTINGS”.
The machine requires the use of serial connected bat-
teries placed in their dedicated vans. Batteries must
be handled using suitable lifting equipment (due to
weight, considering the type of batteries chosen, and
coupling system).
The batteries must be in accordance with CEI 21-5
Norms.
Strictly follow manufacturer/distributor indications
for the maintenance and recharge of the batteries.
All installation and maintenance operations must be
executed by specialized staff, using suitable protection
accessories.
For batteries installation, it is necessary to reach the
battery compartment as indicated under paragraph
“ACCESS TO THE BATTERY COMPARTMENT”.
1. Place the batteries in its compartment.
2. Connect the terminals, respecting the polarities,
avoiding contact with other parts that could create
short circuit.
BATTERY CHARGER
Make sure that the battery recharger is suitable for the
installed batteries, both for their capacities and type
(lead/acid or GEL and equivalent).
In the plastic bag containing the use and maintenance
you will nd the coupling connector for the recharger.
It must be assembled onto the cables of your recharg-
er, following the instructions given by the manufac-
turer.
ON-BOARD BATTERY RECHARGER
If the machine is equipped with the incorporated bat-
tery recharger please refer to the instructions of the
manufacturer of this accessory what the recharging
operations require.
The battery recharger is connected directly to the bat-
tery poles.
During the charge, a system is activated that does not
allow the machine to function.
The battery charger cable has a maximum length of 2
meters and must be connected to a single phase plug.
BATTERIES CHARGE LEVEL INDICATOR
The battery charge level is visualized on the display
with its respective symbol (see " CONTROLS DIS-
PLAY").
When the last segment of charge starts
blinking, the battery is almost low and the
suction and brushes functions are disabled.
When even the last segment of charge turns
off, the battery is completely low and the
machine stops.
Bekijk gratis de handleiding van Tornado 99786, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | 99786 |
| Categorie | Boenmachine |
| Taal | Nederlands |
| Grootte | 11930 MB |
