Toolson DWS225R handleiding
Handleiding
Je bekijkt pagina 23 van 232
GB
|
23
Voltage
Before connecting electric tool to the socket, make
sure that the supply voltage be in accordance with
rated voltage. If the former is greater than latter and
the device is powered on by mistake, it may result
in damage of devices and injuries of people. As for
indenite supply voltage of socket, never try to plug
for use. Besides, the damage of devices may also
occur if the supply voltage falls below rated voltage.
Notes regarding vibration and noise emissions
Reduce noise emissions and vibrations to a mini-
mum!
1. Only use power tools which are free of defects.
2. Maintain and clean the power tool on a regular
basis.
3. Adjust your way of working to the power tool.
4. Do not overload your power tool.
5. Have your power tool inspected, if necessary.
6. Switch o the power tool when it is not in use.
Remaining risks
Even if you use this power tool in compliance with
the regulations, there arestill remaining risks. The
following risks may occur due to the type and design
of the power tool:
a) Damage caused to your health resulting from
hand/arm vibrations if the power tool is used over
a Ionger period of time or if it is not properly used
and maintained.
b) lnjury and damage to property caused by ying
o insertion tools which are unexpectedly ex-
pelled from the power tool due to sudden dam-
age, wear or incorrect insertion.
c) Burns and cuts if the insertion tools are touched
directly after use and/or with your bare hands.
5. Technical Specications
Dimensions L x W x H 450 x 270 x 210 mm
Round sanding head
Ø 225 mm
n: 1000-2200 1/min
Triangular sanding head edge length 280 mm
Oscillation 3000-6000 1/min
Weight 3.8 kg
Motor 230 V / 50 Hz
Input Power P1 750 W
Protection class II
Sound pressure level L
PA
91.3 dB(A),
K
pA
: 3 dB (A)
Sound power level L
WA
102.3 dB(A),
K
wA
: 3 dB (A)
Vibration
a
h:
7.66 m/s
2
K: 1.5 m/s
2
Subject to technical changes!
Warning
The declared vibration total value has been meas-
ured in accordance with a standard test method and
may be used for comparing one tool with another.
The declared vibration total value may also be used
in a preliminary assessment of exposure.
The vibration emission during actual use of the pow-
er tool can dier from the declared total value de-
pending on the ways in which the tool is used. There
is the need to identify safety measures to protect the
operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when
the tool is switched o and when it is running idle in
addition to the trigger time).
6. Before starting the equipment
Attaching/changing the sanding head
(Fig. 2.1, 2.2)
Before performing any work on the electric power
tool, pull out the main plug.
To attach:
1. Press the lock button on the side of the tool;
2. Put the tool on the sanding head and rotate to get
the correct position
3. Release the lock button to engage.
To change: Press the lock button on the tool change
head and remove sanding head. The triangular sand-
ing head is attached/changed in the same way. When
attaching the tool change head, ensure that the locks
engage correctly.
Installation & Sandpaper Replacement (Fig. 3)
To ensure the replacement procedures, place the
device on the smooth ground prior to installation.
Take the sandpaper from the toolbox, and then x
it onto the disk. The back of the sandpaper (Item l)
will automatically glue with the disk/adhesive disk,
making both connection and conduction available. In
order to promote the sanding eciency, it is neces-
sary to change the sandpaper after the device has
been operational for a certain period.
Firstly, switch o the device and disconnect the sock-
et. Then, remove the previous sandpaper entirely
from the disk, so as to lay new sandpaper neatly as
well as facilitate future replacement. At last, x new
sandpaper in position.
For round sanding head only:
Conduct a test run to check that the sanding tool is
Clamped in the centre.
Bekijk gratis de handleiding van Toolson DWS225R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toolson |
| Model | DWS225R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31672 MB |
