Toolson DWS225DC handleiding
Handleiding
Je bekijkt pagina 34 van 296
34
|
GB
13. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
Product does not start Power supply interrupted Check power supply by connecting
another product
Power cord or plug defective Have an electrician check the tool
Other electrical defect of the product Have an electrician check the tool
Product does not operate
with full power
Extension cord too long and/or cross-
section too small
Use extension cord with permissible
length and/or adequate cross-section
Power supply (e.g. generator) voltage
is too low
Connect product to an appropriate
power supply
Poor operation results Accessory worn out Have accessory replaced
Sanding plate worn out Have sanding plate replaced
Considerable dust formation Dust extraction not connected/
switched on
Connect / switch on dust extraction
Bekijk gratis de handleiding van Toolson DWS225DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toolson |
| Model | DWS225DC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 39115 MB |
