Toolland WEH300 handleiding
Handleiding
Je bekijkt pagina 6 van 84
WEH200/WEH300
V. 07 – 24/06/2021 6 ©Velleman nv
• Only use the appliance for the purpose for which it is designed.
Never lift personnel using the cable hoist.
• Do not pull the power cable in order to pull out the plug. Protect
the power cable from heat, oil and sharp edges.
• Never attempt to raise fixed or jammed loads. It is prohibited, to
lift a weight crookedly, or to pull it along the floor. It is
prohibited, to transport hot molten masses.
• Prohibit unwanted start-ups on loose steel rope. Be sure to hoist
the loads with lowest speed from the ground. The cable should be
tense but not unwound when start loading from the ground.
• Disconnect from the mains after use.
• Do not pull loads sideways or from one side. Do not allow the
load to swing.
• Ensure that the hook moves in the same direction as shown on
the control switch.
• The end switch is not allowed to be used as an off-switch or be
dismantled, which is a safety device to prevent that the weight is
lifted over the boundary.
• Do not leave the load hanging in the air long-term to prevent the
deformation of the pieces. Do not carry out any repairs or
inspections while the appliance is in operation.
• Check the cable hoist at regular intervals for signs of damage.
The control switch must always be in good condition.
• Store the appliance in a proper manner when it is not in use.
Store in a dry, high or lockable place, out of the reach of children
including p
lastic bags, boxes, Styrofoam and etc.
• Have repair and service work carried out only by authorized
workshops by a trained electrician. Repair work must only be
carried out by a trained electrician.
• Do not switch the appliance on and off quickly (inching mode).
• Always concentrate fully when operating the cable hoist.
• Depending on the frequency of use, after 20 hours of continuous
operation, the appliance must be taken in for a thorough
maintenance (at least once a year).
• If the brakes stop functioning and the load lowers quickly, press
the off-switch immediately and then the on-switch. After
unloading, please send the appliance to a qualified professional
for repairs.
Bekijk gratis de handleiding van Toolland WEH300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toolland |
| Model | WEH300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14586 MB |
