Tomahawk TVSA-H handleiding
Handleiding
Je bekijkt pagina 12 van 29
5.2 To Stop
5.2.1 Reduce the engine speed by the moving throttle completely in the opposite direction
of the arrow.
5.2.2 Let the engine idle for 2 - 3 minutes before turning it off.
5.2.3 Press the emergency stop switch on the handle.
CAUTION: In an emergency situation, turn off the engine switch immediately. In normal
conditions, do not stop the engine when the screed is at high speed or the engine
temperature will rise suddenly, possibly causing engine parts to jam or the oil to deteriorate.
5.3 Application
While concrete is being poured, a screed is used to smooth concrete and pull the excess off
the back of the form. Utilizing vibratory screeds will achieve the best results, while saving
you time and back fatigue.
This screed should be used for smoothing and striking off concrete. For floating concrete,
use a TOMAHAWK Power Trowel. Available in 24” Edgers, 36”, 46”, Fast-Pitch, Ride-On.
5.4 Operation
5.4.1 Once the engine has started and warmed up, open the throttle fully.
5.4.2 Slowly move the screed backwards watching for smooth concrete in front of the
screed.
6. AFTER EACH USE
6.1 Clean Up
6.1.1 Clean the screed and screed board with water to remove all concrete but take care that
the engine does not get wet. Wire brushes can be successful in removing hard concrete.
6.1.2 Clean the engine cylinder cooling fins. A broom or old brush are good tools to remove
concrete before it becomes solid.
6.1.3 Refer to the engine manual for more information about the engine.
12
Bekijk gratis de handleiding van Tomahawk TVSA-H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tomahawk |
| Model | TVSA-H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9404 MB |
