Toa TS-D1100-MU handleiding
Handleiding
Je bekijkt pagina 35 van 52
35
11.2. Microphone Connection
Attach the TS-D1000-M1 Standard microphone or
TS-D1000-M2 Long microphone to the Chairman or
Delegate unit as shown at right.
11.3. Connection Test
It is possible to conrm whether all Conference units are correctly connected following system setup.
Step 1. Press the Connection test key on the Master control unit’s top panel for 3 seconds or more.
The unit is placed in Connection test mode, causing the Connection test indicator to light and all
connected microphones’ Indicators* to ash.
Step 2. Visually check to conrm that the microphone’s Indicators* of all
connected Conference units are ashing.
Conference units displaying ashing microphone’s Indicators*
are correctly connected.
If any units have microphone’s Indicators* that do not ash, check
the connection between the unresponsive Conference unit and its
microphone, as well as the connection between that Conference
unit and the Master control unit or Sub control unit.
Step 3. Press the Connection test key again for 3 seconds to
terminate the Connection test mode.
This causes both the Connection test and microphone’s
Indicators* to extinguish.
* The Volume indicator in the case of a Speaker unit
TS-D1000-CU Chairman unit
or
TS-D1000-DU Delegate unit
Indicator: Flashes
TS-D1100-MU
Connection test key: Press for 3 seconds
or more.
Connection test indicator: Lights
Indicator: Flashes
TS-D1100-MC
Microphone unit
Volume indicator: Flashes
TS-D1100-SP Speaker unit
TS-D1000-CU
Chairman unit
or
TS-D1000-DU
Delegate unit
Indicator
TS-D1000-M1
Standard microphone
or
TS-D1000-M2
Long microphone
Bekijk gratis de handleiding van Toa TS-D1100-MU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | TS-D1100-MU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5846 MB |
