Toa TS-D1100-MU handleiding
Handleiding
Je bekijkt pagina 20 van 52
20
6.2. Initiating Priority Speech (TS-D1000-CU Chairman Unit Only)
Only the TS-D1000-CU Chairman unit has Priority control over speaking functions. Even when a speech is in
progress among Conference units, the Chairman unit can terminate the speech and supersede other speakers.
Chairman unit priority speech activation can dier depending on whether operation is set to PTT (see below)
or ALT (the next page). Priority speech operation can be changed by browser. For details, please refer to the
separate Instruction Manual (Browser Settings).*
Note
Chairman unit priority speech cannot be activated when the Conference mode is set to Voice activation.
(See "Conference Mode Setting" on p. 36).
6.2.1. When priority speech activation is set to PTT (factory default setting)
Step 1. Speak while holding down the Priority speech key.
Both the Speech and the microphone’s Indicators light, and the
microphone turns on.
A single-tone chime is sounded at all other Conference units,
disabling speech from the Conference units.
The chime can be turned ON or OFF in the browser settings
(factory default setting: ON).
For details, please refer to the separate Instruction Manual
(Browser Settings).*
Notes
• During Chairman unit priority speech, sound output from
connected wired microphones, video conference system, and
PC being connected to the USB port are muted.
• In the case of systems congured with multiple Chairman
units, if one Chairman unit has initiated Priority speech, other
Chairman units cannot initiate Priority speech, even if their
Priority speech keys are pressed.
Tips
• Monitor speaker sound volume is attenuated when both
Speech and the microphone’s Indicators are lit.
• Monitor speaker volume can be muted in the browser settings.
For details, please refer to the separate Instruction Manual
(Browser Settings).*
Step 2. Release the Priority speech key after speaking is completed.
Both the Speech and the microphone’s Indicators extinguish,
returning monitor speaker output to its original volume.
Note
Terminated Conference units do not automatically revert to their
previous speaking modes after Priority speech is terminated.
In such cases, rst press the Talk key again to cause both the
Speech and the microphone’s Indicators to light, then begin
speaking.
* Can be downloaded from the TOA DATA Library (https://www.toa-products.com/international/).
TS-D1000-M1
Standard microphone
or
TS-D1000-M2
Long microphone
Indicator
Priority speech key
Speech indicator
Bekijk gratis de handleiding van Toa TS-D1100-MU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | TS-D1100-MU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5846 MB |
