Handleiding
Je bekijkt pagina 19 van 20
19
10. SPECIFICATIONS
Model No. SR-C8LWP SR-C8SWP
Enclosure Bass-reex type
Power Handling
Capacity
Continuous program: 360 W (single-amp mode)
Low : 360 W, High : 180 W (bi-amp mode)
Rated Impedance 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode)
Sensitivity 98 dB (1 W , 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode)
Frequency Response
65 Hz to 20 kHz*
Crossover Frequency
1.6 kHz*
Directivity Angle Horizontal: 110°, Vertical: 5° Horizontal: 110°, Vertical: 15°
Speaker Component
Low frequency:
20 cm (8") cone-type
High frequency:
Wave front control horn
110°(horizontal) x 5°(vertical)
+
compression driver x 2
Low frequency:
20 cm (8") cone-type
High frequency:
Wave front control horn
110°(horizontal) x 15°(vertical)
+
compression driver x 2
Connected Cable Direct cable withdrawal from internal speaker: ø8.6 mm (ø0.34"),
conductor cross section: 1.25 mm
2
, 4-core cable, 3 m (9.84 ft)
Water Protection IPX4
Finish Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint
Dimensions 526.6 (w) x 293 (h) x 296 (d) mm
(20.73" x 11.54" x 11.65")
526.6 (w) x 293 (h) x 294 (d) mm
(20.73" x 11.54" x 11.57")
Weight 17 kg (37.48 lb) 16 kg (35.27 lb)
Accessory M8 connection bolt ...... 4
Option Rigging frame: SR-RF8WP
Digital speaker processor: DP-SP3
10.1. SR-C8LWP and SR-C8SWP
* When recommended parameters are applied by the optional digital speaker processor DP-SP3
Note: The design and specications are subject to change without notice for improvement.
10.2. SR-C15BWP
Enclosure Bass-reex type
Power Handling
Capacity
Continuous program: 450 W
Rated Impedance 8 Ω
Sensitivity 93 dB (1 W , 1 m)
Frequency Response
40 to 400 Hz*
Crossover Frequency
125 Hz*
Internal Speaker 38 cm (15") cone-type
Connected Cable Direct cable withdrawal from internal speaker: ø8.6 mm (ø0.34"),
conductor cross section: 1.25 mm
2
, 4-core cable, 3 m (9.84 ft)
Operating Temperature
–10 to +50°C (14 to 122°F)
Water Protection IPX4
Finish Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint
Dimensions 526.6 (w) x 594.8 (h) x 550 (d) mm (20.73" x 23.42" x 21.65")
Weight 41 kg (90.39 lb)
Accessory M8 connection bolt ...... 4
Option Rigging frame: SR-RF8WP
Digital speaker processor: DP-SP3
* When recommended parameters are applied by the optional digital speaker processor DP-SP3
Note: The design and specications are subject to change without notice for improvement.
Bekijk gratis de handleiding van Toa SR-C8SWP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | SR-C8SWP |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1890 MB |
