Toa RM-300MF handleiding
Handleiding
Je bekijkt pagina 52 van 150
52
10. SURVEILLANCE
10.1. What Is the Surveillance Function?
The surveillance function continually monitors operating conditions for each piece of equipment in the
system, operations between equipment components, connections and communications between equipment
components,powersupplyconditionsandotherimportantcomponentpartsandpointsextendingfrominput
to output. If malfunctions or cable breakage is detected, details of such irregularities* are displayed on the VM-
3360VAorVM-3240VA’sLCD.Atthesametime,thecommunicationsfailureindicatororfailureindicatoronthe
systemequipmentflashestoalertthesystemoperatortosuchirregularitiesalongwithabuzzertone.
The setting software is used to set surveillance time intervals, component parts to be monitored and subsequent
operations when a failure is detected. (Refer to "Surveillance Settings" in the separate software instruction
manual.)
DetectedfailuresarerecordedintheVM-3360VAorVM-3240VA’slog,andtherecordedlogcanbeconrmed
using the setting software. (Refer to "Log Display" in the separate software instruction manual.)
* For LCD failure display, refer to p. 63.
10.2. How to Use the Surveillance Function
Besuretoperformthefollowingsettingstoenablethesurveillancefunction.Ifnotperformed,thesurveillance
function cannot be used.
• Initializesurveillance settings usingthesetting menu displayedontheVM-3360VA orVM-3240VA’sLCD.
(Refer to "Surveillance Settings" on p. 87.)
Note
Besuretoperformthisinitializationaftercompletingthesysteminstallationandconnections.
• Use the setting software to set the surveillance function. (Refer to "Surveillance Settings" in the separate
software instruction manual.)
10.3. Monitored VM-3000 System Components
Shownbelowarethemonitoredcomponentpartsandpoints:
• VM-3360VA or VM-3240VA
• Automatic emergency announcement
• Expansionamplier(VM-3240EorVM-3360E)
• Emergency remote microphone (RM-300MF)
• Battery
• Speaker (short or open circuit)
• Speaker (ground fault)
• Charging device (VX-2000DS)
• Emergency control terminal
• General-useremotemicrophone(RM-200M)
• Extensionamplier(VP-2241orVP-2421)
• Standbyamplier(VP-2241orVP-2421)
Using the setting software, enable or disable settings individually for each of the above items. (Refer to
"Surveillance Settings" in the separate software instruction manual.)
Tip
Each of the above items can be registered into up to 64 groups only when all the versions of VM-3000VA
firmware, VM-3000E firmware, and VM-3000 Setting Software are 2.00 or later. Each group can be assigned to
the RM-300MF's key, which functions as a failure indicator. (Refer to "RM-300MF settings" in "Event Settings"
in the separate software instruction manual.)
Bekijk gratis de handleiding van Toa RM-300MF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | RM-300MF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19502 MB |
Caratteristiche Prodotto
| Gewicht | 1100 g |
| Breedte | 200 mm |
| Diepte | 82.5 mm |
| Hoogte | 215 mm |
| Kleur behuizing | Wit |
