Toa RM-300MF handleiding
Handleiding
Je bekijkt pagina 48 van 150
48
Differences in System Operation Due to "System Type" Settings When Priority
Broadcasts Are Made
[In a 1-channel broadcast system]
Whenanotherhigherprioritybroadcastisstartedduringabroadcast,ifbroadcastareasforthetwoaredifferent,
the original broadcast is cut off in areas other than those where the higher priority broadcast has been made.
[In a BGM/Paging broadcast system]
Priorities1–6areassignedtopagingcallsmadebytheVPseriesstandbyamplifiers,whilePriorities7(MIX)and8
(BGM)areforBGMbroadcastsmadebytheVM-3000seriesAmplifiers.Whenanotherbroadcastwithpriority1–6
is made during a broadcast with priority 7 or 8, if broadcast areas for the two are different, the original broadcast is
maintained in areas other than those where the latest broadcast has been made.
8. PRIORITY SETTINGS
8.1. General Broadcast Priorities
In general broadcasts, priorities can be set to each input source of the VM-3240VA's or VM-3360VA's, and the
VM-3240E'sorVM-3360E'slocalinputsource.Followingaresuchpriority-assignableinputsorsoundsources:
INPUT1–4 (audioinput), BGM1&2(BGMinput),RM1 &2LINKIN(remotemicrophoneinput), internal
automaticgeneralannouncements1–6,andLocalINPUT*(audioinput).
Priority levels can be set on the setting software. (Refer to "Priority Settings" in the separate software instruction
manual.)
• The lower the number, the higher the priority. Priorities that can be set differ depending on the connected
terminal.
• WhileabroadcastwithPriority1–6isbeingmade,ifanotherbroadcastwithhigherpriorityismade,the
lowerprioritybroadcastisinterrupted.Whenmultiplebroadcastswiththesamepriorityaresimultaneously
made,thelatestbroadcasttakesprecedence(default:last-in-rst-outpriority).Thisprioritycanbechangedto
arst-in-rst-outarrangementthroughsoftwaresettings.Theoriginalbroadcastisrestoredafterthepriority
broadcast is complete.
• Priority7canbeassignedonlytoInputs1–4(audioinput).SettingtheseinputstoPriority7(MIX)allows
themtobeusedasBGMsourceinputs.IftwoormoreoftheseinputsaresettoPriority7,theirsoundsource
outputsaremixed.
• Priority8canbeassignedonlytoBGM1&2(BGMinput).IfbroadcastwithPriority1–7isstartedduring
BGM(Priority8)playback,theBGMistemporarilyattenuatedtoallowthebroadcastwithPriority1–7togo
through.TheoriginalBGMplaybackisrestoredwhentheprioritybroadcastiscomplete.
• Whenmultipleinputsoundsourcesaresimultaneouslybroadcast,theOutputindicatorindicatestheinput
sound source with the highest priority.
• Depending upon priorities set to each input terminal (sound source), operations of the internal attenuator
(speakeroutputvolumecontrol),externalattenuatorandmastervolumecontroldiffer.
* Applicable only when all the
versions of VM-3000VA
firmware, VM-3000E
firmware, and VM-3000
Setting Software are 2.00 or
later.
Priority Internal ATT. ExternalATT. Master volume
1,2 Bypass Bypass Bypass
3, 4 Bypass Enable Bypass
5, 6 Bypass Enable Enable
7 (MIX) Enable Enable Enable
8(BGM) Enable Enable Enable
Input Terminal (Sound Source) Priorities
Inputs1–4(audio) 1–6and7(MIX)
BGM1&2(BGM) 8(BGM)
RM1&2LINKIN(remotemicrophone) 1–6
Automaticannouncements1–6
(Internal sound source)
1–6
Local Input* 1–6
Bekijk gratis de handleiding van Toa RM-300MF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | RM-300MF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19502 MB |
Caratteristiche Prodotto
| Gewicht | 1100 g |
| Breedte | 200 mm |
| Diepte | 82.5 mm |
| Hoogte | 215 mm |
| Kleur behuizing | Wit |
