Toa RM-300MF handleiding
Handleiding
Je bekijkt pagina 24 van 150
24
1. Indication Label Holder
Write the name, purpose, etc. of the indicator
and key on a label and insert the label into the
holder from the top. Labels can be printed using
the setting software. (For more information, refer
to "Printing Remote Microphone Labels" in the
separate software manual.)
2. Power Indicator (green)
Lights when power is supplied to the unit.
3. Communication Failure Indicator (yellow)
Flashes when a failure is detected in communications
with the VM-3360VA or VM-3240VA.
4. Not used.
Lights when the system is in emergency status.
5. Broadcast Zone / Automatic general broadcast
Announcement Start Indicators (green)
Indicator’s function assigned to each indicator is
determined by software settings.
Broadcast Zone Indicators
Lightwhentheircorrespondingzonesareselected.
Automatic general broadcast Announcement
Start Indicators
Light when an automatic announcement is started.
6. Broadcast Zone Selector / Automatic general
broadcast Announcement Start Keys
Key function assigned toeach keyis determined
by software settings.
Broadcast Zone Selector Keys
Select broadcast zones. Pressing the Talk key
(7) after zone selection allows microphone
announcements to be broadcast over the selected
zone(s).
Automatic general broadcast Announcement
Start Key
Automatic general broadcast announcements are
broadcastovertheselectedzone(s).
7. Talk Key
This key is used for general broadcast microphone
announcements.PressingtheTalkkeyafterzone
selection allows microphone announcements to be
broadcastovertheselectedzone(s).
8. Talk Indicator (green)
Lights when the Talk key (7) is pressed.
9. External Microphone In-Use Indicator (orange /
green)
Flashes when a paging call is made from the
externalremotemicrophone.
Orange:Indicates the mode that disables
broadcasts from the unit.
Green:
Indicates the mode that allows the unit to
interruptbroadcastsfromexternalequipment.
10. Not use d.
11. Microphone
Used for making announcements.
12 . D IP Switch
Used to set the unit ID number and equipment
functions.
(Refer to "DIP Switch Functions" onp. 92.)
Switches 1 and 2
Set the ID number of the Remote Microphone.
Defaultsetting:ON
(Refer to "Unit ID Number Settings" on p. 93.)
Switch 3
Not used.
Defaultsetting:ON
Switch 4
SetstheTalkkey’soperatingsystem.
Defaultsetting:ON
(Refer to "TalkKeySettings"onp.94.)
Switch 5
Not used.
Defaultsetting:ON
Switch 6 [COMPRESSION]
Enables/disablescompression.
Defaultsetting:ON
(Refer to "Compression Settings" on p. 93.)
13. RM-210 Connector [Extension]
ConnecttheaddedRM-210RemoteMicrophone
Extensiontothisconnector.
14. Power Supply Input Connector
The VM-3360VA or VM-3240VA can only supply
power to one RM-200M Remote Microphone.
Connect the power supply to this connector when
using multiple Remote Microphones or Remote
MicrophoneExtensions.
15. Link Connector (RJ45 Connector)
ConnectstotheVM-3 3 6 0VA’s , VM -324 0VA’s,R M -
300MF’sorotherRM-200M’sLINKconnector.
16 . Not used.
17. Microphone Volume Control
Adjuststhevolumeoftheunit’smicrophone(11).
Rotate clockwise to increase the microphone
volume.
Rotate counterclockwise to decrease the
microphone volume.
18. External Microphone Input Jack (3.5 mm mini
jack)
An electret condenser microphone can be
connected to this terminal. Connecting a
microphone to this jack disables the unit’s
microphone(11).
Bekijk gratis de handleiding van Toa RM-300MF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | RM-300MF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19502 MB |
Caratteristiche Prodotto
| Gewicht | 1100 g |
| Breedte | 200 mm |
| Diepte | 82.5 mm |
| Hoogte | 215 mm |
| Kleur behuizing | Wit |
