Toa RM-210F handleiding
Handleiding
Je bekijkt pagina 28 van 77
2-15
Chapter 2
INDICATOR STATUS OF REMOTE MICROPHONES
1.16. Indicator State at the Time of Audio Monitor
When an audio monitor function has been assigned to a function key, the 2 indicators to the left of the key
indicate its selection and audio monitor statuses.
Note
Only one remote microphone can be used for audio monitoring even when 2 or more remote microphones are
connected to a single VX-3000F.
Only the remote microphone of which Audio monitor key is pressed most recently is effective for audio
monitoring, causing other remote microphone engaged in monitoring to be interrupted.
Broadcast status indicator
Selection indicator
Function key (Audio monitor key)
Indicator Status Meaning
Selection indicator Unlit
When the function key is not pressed
Lights green
When the function key is pressed
Broadcast status indicator Unlit
When no broadcast is made to the zone assigned to this
function key
Lights green
When audio signals are broadcast to the zone assigned
to this function key while the function key is held down
1.17. Indicator State at the Time of Intended Control Input
When an intended control input function has been assigned to a function key, the 2 indicators to the left of the
key indicate its selection and control statuses.
Note
Operation may become invalid even if you press the function key when the Control status indicator is lighting.
This is such a case when the control input is placed in Active state by other device.
Wait until the Control status indicator goes off, then press the function key again.
Function key operation is always active as long as the Control status indicator is unlit.
Control status indicator
Selection indicator
Function key (Intended control input key)
Indicator Status Meaning
Selection indicator Unlit
When the function key is not pressed
Lights green
When the function key is pressed
Control status indicator Unlit
When the control input assigned to this function key is in
Inactive* state
Lights yellow
When the control input assigned to this function key is in
Active* state
* When the control input polarity is set to "NO" in the Event setting, the function key becomes Active while the
control input is closed, and becomes Inactive when it is open.
Conversely, when the polarity is set to "NC," the function key becomes Active while the control input is open,
and becomes Inactive when it is closed.
Bekijk gratis de handleiding van Toa RM-210F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | RM-210F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8488 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 350 g |
| Breedte | 110 mm |
| Diepte | 110 mm |
| Hoogte | 215 mm |
