Toa RM-210F handleiding

77 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 77
1-8
Chapter 1
NOMENCLATURE
3. RM-300X REMOTE MICROPHONE AND RM-210F REMOTE
MICROPHONE EXTENSION
3.1. RM-300X
• TheRM-300XRemoteMicrophonefeatures13functionkeys,1coveredkey,1talkkey,andtheindicator
lamps associated with these. Functions are assigned to the function keys using the VX-3000 Setting Software.
• VX-3000settingsoftwarepermitsdesiredfunctionstobeassignedtoindividualFunctionkeys(equippedwith
2 LED indicators).
• ConnectingRM-210FRemoteMicrophoneExtension(maximum7)totheRM-300Xexpandsthenumberof
function keys and indicators in blocks of 10.
•Upto8RM-300XRemoteMicrophonescanbeconnectedwithinaVX-3000F.
• TheDIPswitchsettingenablesall-zoneemergencybroadcastsfromtheRM-300XRemoteMicrophone,even
when the CPU malfunctions.
[Top]
1
3 5
6
7
8
8
10
2 4 6 7 9
11 12 13
1. Microphone
Used for voice announcements.
2. Power indicator (Green)
Lights when the power is turned on.
3. Failure indicator (Yellow/Red)
Flashes yellow if some problem within the system
is detected.
This indicator will light yellow if the signal to the
VX-3000F or VX-3000F to which the RM-300X is
connected is interrupted for 5 seconds or more.
This indicator will light red while the all-zone
emergency broadcasts is being made (p. 3-15)
or the RM-300X is in the reset process.
4. Emergency indicator (Red)
Lights when the VX-3000F is in an emergency
condition.
5.
Emergency/all-zoneemergencybroadcastkey
(Covered)
When the Emergency Broadcast Pattern Start
function has been assigned to this key by the VX-
3000 Setting Software, pressing it activates the
emergency broadcast from the VX-3000F.
Independently of settings made by the VX-3000
Setting Software, holding down this key for 4
seconds or more in combination with DIP switch
(14) setting causes the CPU to be bypassed,
enabling the all-zone emergency broadcast to
be made by way of analog transmissions. (See
p. 3-15.)
6.Indicationlabelinsertslots
Labels can be printed using the VX-3000 Setting
Software. (See the separate Setting Software
Instructions, "PRINTING LABELS FOR REMOTE
MICROPHONES.")

Bekijk gratis de handleiding van Toa RM-210F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkToa
ModelRM-210F
CategorieNiet gecategoriseerd
TaalNederlands
Grootte8488 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht350 g
Breedte110 mm
Diepte110 mm
Hoogte215 mm