Toa MP-16 handleiding
Handleiding
Je bekijkt pagina 5 van 10

5
[Rear]
10 11 12 13
9
9
14
9. Cable tie mounts
To prevent connected plugs and wires from
accidentally pulling out, secure the cables from
the AC adapter jack (11), DC power input terminal
(12) and Input terminals (14) using either (or
both) of these conveniently positioned cable tie
mounts, as shown below. Please prepare cable
ties separately.
Cable tie
Cable tie mount
Input terminal wiring
10. Functional ground terminal
Noise may be generated when external equipment
is connected to the unit. In this case, connect
this terminal to the functional ground terminal of
the external equipment, and the noise may be
reduced.
Note
This ground is not for protective ground.
11. AC adapter jack
Connect the optional AD-246 AC adapter.
Tip
If power is sent to both this jack and DC power
input terminal (12), power is supplied to the MP-
16 from the terminal having the higher voltage.
12. DC power input terminal
Connect the DC power to this terminal.
Tips
• The DC power supply must have a capacity of
over 520 mA.
• The range of input voltage to be fed to this
terminal should be between 20 V and 33 V DC.
13. Setting switches
• Switch 1
Permits the level meter to ignore and not display
the recurring small signal used for failure
detection.
ON: Not displayed
OFF: Displayed (factory default)
Note
Change this setting only when power is turned
OFF.
• Switches 2 – 4
These switches are for maintenace purposes
only.
Be sure that they are set to the OFF position
whenever the MP-16 is operated.
14. Input terminals (1 – 16)
Be sure that all line signal wires are correctly
inserted into the LINE holes of the connector. (H:
Hot, C: Cold, E: Earth)
Insert the speaker signal wires into the SP holes
(+, –) in the connector (this applies to both high
and low impedance).
When an unbalanced line signal is being input,
short C and E. If hum is generated by ground
loops, connect only H and C.
Bekijk gratis de handleiding van Toa MP-16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Toa |
Model | MP-16 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 1063 MB |