Toa IP-A1PA12 handleiding
Handleiding
Je bekijkt pagina 18 van 20
18
IP-A1PA12 (bottom)
LAN cable
Reset key
From PoE+
switching hub
Status indicator
IP-A1PA12 (front)
1
2,3
3
11. INITIALIZATION OF SETTINGS
Follow the procedure below to return all unit settings to their default:
Tip
When initialized with the reset key, the unit’s sound source les and certicate les are left in "Media"
and "System" respectively, not deleted. Initialization to factory defaults, including deletion of sound
source les and certicate les, should be performed using the browser settings menu.
Step 1. Connect the speaker to the PoE+ switching hub using a LAN cable.
The unit will be started.
Step 2. Hold down the reset key located on the bottom panel using a pointed tool.
The unit automatically restarts and settings initialization begins.
Tip
Clicking on the reset key causes the unit to be restarted.
If pressure on the reset key is released part way through the initialization process, only unit
restart will be performed, and the settings will not be initialized.
To click on the reset key, use a tool that is thinner than ø1.5 mm (0.06") and longer than
5 mm (0.2").
Step 3. When the status indicator lights yellow, release the reset key.
When initialization is complete, the status indicator lights green and all settings will be
initialized to their default settings.
[Default Settings]
Username: admin
Password: guest
IP address: 192.168.14.1
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
Bekijk gratis de handleiding van Toa IP-A1PA12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | IP-A1PA12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2020 MB |
