Handleiding
Je bekijkt pagina 7 van 12
7
Step 2. Wiring and impedance settings
Step 2-1. Unplug the detachable input connector from
the speaker socket, and loosen the screws
of the terminal with a screwdriver.
Detachable input connector
Step 2-2. Insert the stripped cable ends into the input connector, and retighten the terminal screws.
[Single connection] [Bridge connection]
From power amplifier
To next speaker
Note
When not bridging the connection, tighten the screws of unused terminals to prevent resonance
noise.
Step 2-3. Attach two sockets to the impedance selection connector to select the desired impedance.
The impedance is preset to 330 Ω (30 W for 100 V line and 15 W for 70 V line).
[When selecting 8 Ω] [When selecting 16 Ω] [When selecting 330 Ω]
(Preset by the factory)
Socket
Note
The H-3 and H-3WP speakers are designed to be used for both 70 V and 100 V line applications.
When using the 100 V line, do not select the "170 Ω" impedance, since the speaker itself or power
amplifier may be damaged.
Bekijk gratis de handleiding van Toa H-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | H-3 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1097 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 3300 g |
| Breedte | 295 mm |
| Diepte | 129 mm |
| Hoogte | 318 mm |
