Handleiding
Je bekijkt pagina 5 van 8
5
11
2
2
Short-piece
Input terminal section
4.2. When using low impedance connection
Step 1. Insert the short piece to the position as shown in the
gure.
Step 2. Connect the cable from the amplier to the position as
shown in the gure.
Note
Depending on the relative installation position of this
Subwoofer speaker to the speaker system (p. 3),
the bass may be attenuated. In such cases, try to
reverse the speaker connections between the positive
and negative terminals and check the output sound
from the speakers. Then, use the connection that
produces the louder bass.
[When using low impedance connection in parallel]
Two Subwoofer systems can be connected in parallel as shown in the gure.
Subwoofer system (1st) Subwoofer system (2nd)
Note
When using 2 Subwoofer systems with low impedance in parallel, connect the speaker cable to the amplier’s
speaker output terminal of impedance 4 Ω or less.
Connecting it to a speaker output terminal of over 4 Ω may cause amplier failure.
Bekijk gratis de handleiding van Toa FB-08WT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | FB-08WT |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 744 MB |
