Handleiding
Je bekijkt pagina 7 van 20
7
6. IMPEDANCE CHANGE
To change the impedance, use a standard screwdriver to rotate the rotary switch on the speaker's rear to select
the desired input power.
Factory-preset : 670 Ω
Factory-preset : 330 Ω
Factory-preset : 170 Ω
[F-03BT-WP-UE or F-03WT-WP-UE]
[F- 05BT-WP-UE or F-05W T-WP-UE]
[F-08BT-WP-UE or F-08WT-WP-UE]
7. INSTALLATION
7.1. Using the Supplied Brackets
The speaker system is supplied with the following brackets.
• U bracket: Used when installing the speaker to a
wall or ceiling
F-03BT-WP-UE,
F-03WT-WP-UE
F-05BT-WP-UE,
F-05WT-WP-UE
F-08BT-WP-UE,
F-08WT-WP-UE
• Speaker brackets: To be attached to the speaker’s
rear surface
F-03BT-WP-UE,
F-03WT-WP-UE
F-05BT-WP-UE,
F-05WT-WP-UE
F-08BT-WP-UE,
F-08WT-WP-UE
Determine the installation position of the U bracket referring to the installation location diagram on p. 8.
Note
Never set the switch to "
" position for 100 V
line operation, as doing so may result in damage
to the speaker.
Bekijk gratis de handleiding van Toa F-08WT-WP-UE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | F-08WT-WP-UE |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2436 MB |
