Handleiding
Je bekijkt pagina 17 van 24
17
Step 3. Secure the speaker bracket to the rear surface of the speaker using the supplied screws.
Recommended tightening torque: 2 N·m
Note
The speaker bracket can also be mounted upside down.
As the angle adjustment bolt is only provided on one side of the speaker bracket, install the bracket in
the direction so that you can easily access the bolt for adjusting the speaker angle in Steps 5 and 6
after installing the speaker bracket to the base bracket in Step 4.
Speaker bracket
Speaker bracket
Machine screw M5 x 20*
Machine screw M5 x 20*
* with plain washer and spring washer, accessory
Angle adjustment bolt
Angle adjustment bolt
[Vertical installation]
[Horizontal installation]
Step 4. Temporarily x the speaker bracket to the base bracket.
4-1. Insert the mounting hole in the speaker bracket onto the shaft of the base bracket xed in Step 1.
4-2. Temporarily fasten the speaker bracket and the base bracket with the supplied ange nut.
Note
Be sure to use the supplied ange nut.
Shaft Shaft
Base bracket
Base bracket
Ceiling
Ceiling
4-1 4-1
4-2
4-2
* F-03BT, F-03WT, F-05BT, F-05WT: For M8
F-08BT, F-08WT: For M10
Flange nut*
(accessory)
Flange nut*
(accessory)
[Vertical installation]
[Horizontal installation]
Speaker bracket
mounting hole
Speaker bracket
mounting hole
Bekijk gratis de handleiding van Toa F-05BT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | F-05BT |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2992 MB |
