Tivoli Audio Model One Digital Gen 3 handleiding
Handleiding
Je bekijkt pagina 10 van 139
5
English
WiFi Mode
Wi-Fi Setup with Apple AirPlay
1. Turn on your unit by pressing the power knob or the power button on the remote.
2. Set your speaker to Wi-Fi mode by short pressing the power knob until the screen displays WiFi source.
The Model One Digital will automatically enter Wi-Fi Setup mode once the WiFi initializes. If your
speaker is not in Wi-Fi Setup mode: press the “Setup” button on the rear of the speaker.
3. On your iOS device, go to Wi-Fi Settings. Make sure to connect your iOS device to the network that you
intend to use your Model One Digital.
4. Scroll down to “Set Up New AirPlay Speaker…” and select “Tivoli Audio M1D3_XXXXXX”.
5. Rename your speaker (recommended) and create a password (optional).
6. Select “Next” and wait for the connection.
7. Wait for the connection confirmation, select “Done”.
8. Once connected the display will confirm with a “WiFi Connected” message.
9. Your speaker is now ready to use with AirPlay. With AirPlay, you're in control of your audio.
For additional support, please visit support.apple.com
Wi-Fi Setup with Tivoli Audio Setup App
Required for Android devices to connect M1D3 to Wi-Fi. If you are connecting your speaker with an Apple
iOS device, either download the Tivoli Audio Setup App or follow the “Wi-Fi Setup with Apple AirPlay”
instructions.
1. Install the Tivoli Audio Setup app by downloading app the on your Cast-enabled smart phone or tablet.
The Tivoli Audio Setup app is available for free on the Google Play and Apple App stores.
2. Allow permissions to Wi-Fi, Bluetooth, Nearby Devices and Location While Using.
3. Make sure to connect your smart phone/tablet to the same network that you intend to use with your
Model One Digital with Google Cast.
4. If you have not already done so, turn on your phone’s Bluetooth connection. This allows your WiFi
information to be sent to the speaker reliably.
5. Turn on your speaker by short pressing the power knob.
6. Set your speaker to Wi-Fi mode by short pressing the power knob until the screen displays "WiFi".
7. Once the WiFi initializes, the screen will indicate WiFi Setup Enabled mode. If your speaker is not in WiFi
Setup mode, press the Setup button on the rear of the radio.
8. Open the Tivoli Audio Setup app on your smart phone/tablet.
9. Tap “Set Up new Device” or “+ Add” at the bottom of the screen and follow the on-screen directions.
10. Wait for the app to scan for available speakers, then select the M1D3 you would like to setup.
11. Confirm you heard the noise.
12. In the next screen, select the correct Wi-Fi address and enter the Wi-Fi password. You may also change
the speakers’ name. Then tap Next.
Bekijk gratis de handleiding van Tivoli Audio Model One Digital Gen 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tivoli Audio |
| Model | Model One Digital Gen 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13926 MB |
